GROMMET HOLE MOUNT

The design of this mount allows it to be affixed through a medium or large grommet hole or around the edge of a desk top.

It mounts to tables as thin as 1" and as thick as 2".  Mount requires a minimum of lip width of 3" or distance from skirt. If you suspect that your desk or work surface material is not strong enough you may add a spacer or piece of wood that displaces pressure over a wider area. Call for further explanation.

DESK EDGE CLAMP MOUNT

This mount affixes between desk top, partition or wall at desired location anywhere along the rear of the work surface.

It mounts to tables as thin as 1" and as thick as 3". Mount requires a minimum of lip width of 3" or distance from skirt. If you suspect that your desk or work surface material is not strong enough you may add a spacer or piece of wood that displaces pressure over a wider area. Call for further explanation.

THROUGH-DESK MOUNT

You simply drill a hole in the top of your desk or work surface to mount this sturdy mount.

It mounts to tables as thin as 1" and as thick as 2". If you suspect that your desk or work surface material is not strong enough you may add a spacer or piece of wood that displaces pressure over a wider area. Call for further explanation.

Align mounting screws (not included) in pre-drilled holes at the top and bottom of mount.

WARNING: Wall mounts must be fastened securely into the wall, preferably into a stud. Do not fasten directly into sheet rock, plaster or dry wall. Work with a contractor or consult your local hardware store if you have any questions on what fastener is appropriate for your wall surface.