DESK EDGE CLAMP MOUNT / GROMMET MOUNT (FLEXIBLE MOUNT KIT C)

This mount affixes between desk top, partition or wall at desired location anywhere along the back of the surface.

Mounts to surfaces 1" to 3.125" in thickness.  The mount requires a minimum of lip clearance of 2". If you suspect that your desk or work surface material is not strong enough, you can add a flat piece of wood that displaces pressure over a wider area. Call for further explanation. Specifications

THROUGH-DESK MOUNT (FLEXIBLE MOUNT KIT C)

Drill a 7/16" hole in your desk or work surface to mount this very sturdy mount.

Mounts to tables as thin as 1" and as thick as 2". If you suspect that your desk or work surface material is not strong enough you may add a sturdy plate to displace stress over a wider area.  Can be attached to thicker surfaces with longer user supplied bolt.  Specifications

BOX / WALL MOUNT (FLEXIBLE MOUNT KIT C)

The Wall Mount or Box Edge (left) can be reversed to be used as a Reverse Wall Mount.  Specifications

HEAVY DUTY WALL MOUNT (KIT D)

Mounts to vertical surfaces with two mounting screws (not included) in holes at the top and bottom of the mount.

WARNING: Wall mounts must be fastened securely into the wall, preferably into a stud. Do not fasten directly into sheet rock, plaster or dry wall. Work with a contractor or contact Ergomart for recommendations.  Specifications

POLE MOUNT (KIT E)

The optional Pole Mount fits to poles from 1.5" to 2" in outside diameter. It is important to remember that this arm only works properly when it is mounted vertically and does not work on horizontal poles. Specifications

Please read about other Pole Mount options with the 192 Series Pole Mount.

Optional Track Mount.  Specifications

Optional Circular Through Desk Mount.  Specifications

Optional Slatwall Mount.  Please call for specifications.