DESK EDGE CLAMP MOUNT

This mount affixes between desk top, partition or wall at desired location anywhere along the back of the surface.

Mounts to surfaces 1" to 3.125" in thickness.  The mount requires a minimum of lip clearance of 2". If you suspect that your desk or work surface material is not strong enough, you can add a flat piece of wood that displaces pressure over a wider area. Call for further explanation. Specifications

THROUGH-DESK MOUNT

You simply drill a 7/16" hole in your desk or work surface to mount this very sturdy mount.

Mounts to tables as thin as 1" and as thick as 2". If you suspect that your desk or work surface material is not strong enough you may add a sturdy plate to displace stress over a wider area.  Can be attached to thicker surfaces with longer user supplied bolt.  Specifications

WALL MOUNT

Mounts to vertical surfaces with two mounting screws (not included) in holes at the top and bottom of the mount.

WARNING: Wall mounts must be fastened securely into the wall, preferably into a stud. Do not fasten directly into sheet rock, plaster or dry wall. Work with a contractor or contact Ergomart for recommendations.  Specifications

It fits to poles from 1.75" to 2" in outside diameter. It is important to remember that this arm only works properly when it is mounted vertically and does not work on horizontal poles.  Specifications