TRS-9110 Specifications VESA Adjustability Image 1

The TRS 9110 Combo LCD and Keyboard Tray System allows for two height placements of the LCD monitor in relationship to the tray. This illustration gives the user an idea of how a small 17" might fit with its VESA hole pattern roughly in the center of the back of the monitor. In this arrangement the LCD bottom is about 4.5 inches from the tray when the tray is set perpendicular to the back bar. The LCD monitor has been attached a the lower VESA hole pattern.

TRS-9110 Specifications VESA Adjustability Image 2

It is good to remember that some LCD monitors have their hole patterns above or below the center of the back. This illustration contemplates a very small 17 LCD with its VESA hole pattern roughly in the center of the back. When attached at the high position of the back bar, a 75mm or 100mm VESA compliant LCD will have about 6.5 inches distance to the keyboard tray.

TRS9110T LCD Monitor Wall Mount Specs Highest Position with Monitor

NOTE - Shown with Tall / HD Wall Plate

Viewed from the side, a second feature of this wall mount is revealed. The interface between the wall mounted tilter and the back bar has a high, middle and low position. Here the tilter head is attached at the top of the back of the back bar. This can prove advantageous in certain installations. The monitor is attached in the high position in this drawing.

TRS9110T LCD Monitor Wall Mount Specs Lowest Position with Monitor

In this image, both the tilter head and the monitor are positioned in their lowest positions relative to the back bar to which they are attached.