IS-LS Compact Adjustable Keyboard Tray and Arm Great for Offices with a Narrow Return, Corner Desk, or Limited Space

Model

Shipping Dimensions

Shipping Weight (lbs)

28029 (arm only)

24" x 13" x 5.75"

10.1 Pounds

IS-LS 28146

24.25" x 13" x 9.50"

15.6 Pounds

IS-LS 28147

24.25" x 13" x 9.50"

16.8 Pounds

IS-LS 25928

24.25" x 13" x 9.50"

16.8 Pounds

IS-LS 28148

24.25" x 13" x 9.50"

18.2 Pounds

IS-LS 28149

28.25" x 13" x 7.50"

15.7 Pounds

IS-LS 28150

24.25" x 13" x 9.50"

19.9 Pounds

IS-LS 28151

24.25" x 13" x 9.50"

16.7 Pounds

IS-LS 28152

24.25" x 13" x 9.50"

18.7 Pounds

TRS20

24" x 13" x 5.75"

15.1 Pounds

Warranty: 5 Year limited

We think these AKP options are impossible to beat in terms of performance, cost and durability.

Make no mistake, you get the best quality mechanism AND premium platform with the IS-LS.
The height adjustment of this product could not be easier—just lift with the hand and release.
Height Adjustment accommodates over 97% of adult users at a desk height of 28.5 inches.
If you want the positive tilt removed, we provide the option for positive tilt lockout at no additional cost.
Adjustment of height anywhere within the range of 6 ¼" without the need for knobs—simply fingertip easy.
Adjusts from as low as 6 inches below work surface to slightly above track height.
The IS-LS is easily adjusted between 20° negative tilt and 10° positive tilt.
Comes complete with hardware and easy mounting instructions.
Designed to provide whisper-quiet operation.
"Shorter" workers and kids need "low profile" (knee clearance) platforms; don't get a device that has lots of bulkiness beneath the tray for people under 5' 4". Chances are, they will hit their knees on the bottom of the mechanism.
Padded palm rests can help keep hands and wrists straighter to reduce unsafe & uncomfortable postures.
We suggest options that allow use of the mouse as close to the keyboard as possible. Frequent mouse users should place the mouse in a position that requires no overt reaching or stretching.
Avoid keyboard "drawers" or pull out trays that provide little, if any, height adjustability. Odds are very high that any given single height position tray is going to be an inappropriate height. Most keyboard drawers or pull-out trays don't provide any tilt capability, which is another important feature our articulating keyboard platforms provide.
Avoid flimsy, cheap products from office supply stores. Many of these products represent the absolute lowest common denominator in support solutions and turn out to be substandard. On the other hand, if you key infrequently or occasionally, then perhaps an inexpensive product is appropriate.
Easy keyboard tray height and tilt adjustments work hand in hand with a worker's ability to change seating postures to help workers achieve numerous postures. The more built in flexibility a workstation has, the greater the likelihood of reduced discomfort, reduced injuries and greater productivity.
If your desk has a skirt, apron, support bar or obstruction underneath, you will have to build up the area where you plan to install your track to the same height as the obstruction, so that the track can be mounted level from front to back. We usually use plywood or MDF strips and attach them to the bottom of the surface. Always check the screws supplied with the keyboard tray to make sure they are short enough not to come through to the other side of your work surface. We suggest carefully pre-drilling small holes where you plan to attach your screws. If you have any questions about installation, do not hesitate to contact us at 888 420 3200.

When you have questions, we have answers: 888 420 3200 or 214 742 6066
Cart \| Home \| Contact \| Privacy \| Terms & Conditions \| Order by Fax \| Sitemap \| Se Habla Español: Extensión 221	Font Size

Compact Adjustable Keyboard Arm and Tray—great for offices with a narrow return, corner desk or limited space