Se Habla Español: Extensión 221.

Font Size

Heavy Duty LCD Arms LCD Monitor Arms Pad & Tablet Mounts Apple Cinema Arms LCD Monitor Stands Multi LCD Mounts LCD Wall Mounts CRT Monitor Arms LCD Data Entry Arms POS Mounts LCD & CRT Accessories

Monitor Hoods Full Spectrum Filters Table & Desk Lights Document Holders

Anti-Fatigue Mats Safety Clothing Foot Rest

Adjustable Desks Power Adjust Tables NPE Ergonomic Chairs Industrial Seating

Computer Keyboard Keyboard Trays Sit Stand Trays Arm Supports

DUAL LCD POLE MOUNT

Dual LCD Monitor Pole Mount mounts two larger LCD monitors side by side on two monitor arms

Dual LCD Pole Mount starts at $324.39

Dual LCD Monitor Pole Mount preview image


Larger Images	Specifications Tilter Options

Quantity

Quick Reference: Click Images to Review Options

Tilter Head Options

VESA Plate Options

Color Choices

Straight Arm Options

This Dual LCD monitor mount is designed for mounting two larger LCD monitors side by side on a floor or ceiling mounted pole system. The triple articulating arm arrangement allows monitors to be adjusted left to right and back and forth. For additional easy movement, each monitor is mounted to a center tilter head which allows for full tilt and 360° rotation. Further, the tilter head components allow for quick adjustment from landscape to portrait for two monitors. This heavy-duty mounting system is perfect for most 19" – 37" flat panel monitors and is commonly purchased with Ergomart's 192 Offset Pole Stand, and our 192 Flange Pole Mount.

Tilt up more than 90° or down 44°
Spring Tilters handle monitors up to 62 pounds
Clamps to poles with outside diameters of 1.5"-2.05"
Next Day Shipping is $88; 2nd Day Shipping $46
Black is in stock color; others have extended lead times
Compatible with 192 Pole Mount Systems (Offset & Flange)
VESA Mounts 100x200mm, 200x200mm, or 200x400mm
MSU4X6 VESA bracket adjusts 100x300 to 400x600mm

�

Shipping Weight	16 pounds
Shipping Dimensions	15" x 11" x 7"
Warranty	3 Year limited

Optional VESA Sizes to Handle Larger or Heavier Monitors
The Adjustable MSU4X6 can fit any VESA hole pattern between 100mm (height) x 300mm (width) and 400mm (height) x 600mm (width). From its largest position, the vertical bars can be reversed and slid inward to fit smaller LCD or plasma screens. See the Compatible VESA Sizes for Heavy Duty MSU4X6 chart, Adjustable MSU4X6 specification drawing and weight note below. Also check your monitor manufacturer against our VESA Standard Interfaces chart or call us with compatibility questions.

*AK HI and PR Note: To determine shipping options, please contact us at 214 742 6066 or sales@ergomart.com or you may select "I will use my shipping account"

**Canada/International Note: Listed shipping prices are for shipments within the lower 48 United States. International Customers ordering outside the US, please contact us for shipping options. 214 742 6066 or sales@ergomart.com or you may select "I will use my shipping account"

DUAL POLE MOUNT SPECIFICATIONS WITH SA1288

Top Image: The Dual LCD pole Mount with two SA1288s shown from the top view. Depending on the size of the mounted monitors the overall reach will change. This illustration shows positioning for monitors that are about 23" wide touching one another in their most forward position.

Bottom Image: Position the SA1288s in a wide position to achieve maximum distance between the tilter heads. This position can support monitors as large as 37". The three articulating points of each arm allows a wide range of larger monitor sizes to be positioned side by side.

DUAL POLE MOUNT SPECIFICATIONS WITH SA0950

Top Image: The Dual LCD pole Mount shown with two SA0950s from the top view. Depending on the size of the mounted monitors the overall reach will change. This illustration shows positioning for monitors that are 21" wide and the maximum forward reach they will have.

Bottom Image: Position the SA0950s in the widest position to achieve maximum distance between the tilter heads. This position can support monitors as large as 32". The three articulating points of each arm allows a wide range of larger monitor sizes to be positioned side by side.

DUAL POLE MOUNT SPECIFICATION DRAWING

Dual Pole Mount side, front, top, and side views.

MSU 400 x 600 mm SPECIFICATION DRAWING

* The MSU4X6 VESA plate can attach to VESA patterns from 100mm x 300mm up to 400mm x 600mm. Its largest position is shown in black. The vertical bars can be reversed and slid inward to create its smallest size, shown in gray. MSU4x6 Large VESA Adapter Bracket weighs 9 pounds and thereby reduces the weight capacity of the Dual Pole Mount by 9 pounds.
* The 25 to 65 weight range arm is reduced when using the MSU4X6 VESA Adapter Bracket to 16 to 56 pounds. MSU4X6 Arm weight limit is 56 pounds.

Front and side specifications for adjustable VESA MSU4x6

DETAILS ABOUT VESA SIZES

All VESA plate measurements are typically described in millimeters. These measurements are industry standards. You may measure the distance between the screw holes on the back of your monitor to determine your VESA hole pattern. The chart below converts the millimeter measurements into inches:

100 millimeters	3.937 inches	About 3 and 15/16ths inches
200 millimeters	7.874 inches	About 7 and 7/8ths inches
300 millimeters	11.811 inches	About 11 and 13/16ths inches
400 millimeters	15.748 inches	About 15 and 3/4ths inches
500 millimeters	19.685 inches	About 19 and 11/16ths inches
600 millimeters	23.622 inches	About 23 and 5/8ths inches

Compatible VESA Sizes for the Optional Heavy Duty MSU4X6
100mm x 300mm
100mm x 400mm
100mm x 500mm
100mm x 600mm
200mm x 300mm
200mm x 400mm
200mm x 500mm
200mm x 600mm
300mm x 300mm
300mm x 400mm
300mm x 500mm
300mm x 600mm
400mm x 300mm
400mm x 400mm
400mm x 500mm
400mm x 600mm

DUAL POLE MOUNT TILTER HEAD OPTIONS

Standard Tilter Head
for Monitor weights: 0 – 25 pounds

Spring Tilter Head
for Monitor weights: 20 – 35 pounds

HD Spring Tilter Head
for Monitor weights: 25 – 65 pounds

If your monitor falls into a gray area, where tilter head specifications overlap, consider the following: monitor thickness (touch-screens especially tend to be front heavy and thicker), frequency of tilt adjustment desired and/or the added use of a thin client holder or bracket between the monitor and tilter.

The thicker the monitor, the greater the lever force delivered by the monitor or payload. If you will adjust the tilt frequently, opt for the stronger tilter head. A flat screen monitor of standard thickness that is not touch screen can typically use the less strong tilter head option. For questions or help deciding which titer head is best suited for your application, call 888 420 3200 or email us.

When you have questions, we have answers: 888 420 3200 or 214 742 6066
Cart \| Home \| Contact \| Privacy \| Terms & Conditions \| Order by Fax \| Sitemap \| Se Habla Español: Extensión 221	Font Size

Most products ship UPS ground to the lower 48 states. Some items such as desks and tables will incur additional charges; the customer will be contacted about those charges before the product is shipped.

Many products may be purchased online with Quick Ship options; others may or may not be available for Quick Ship—call or email us with your requirements. Most non Quick Ship products arrive within 11 business days. Chairs take 3 to 4 weeks. Call or email for assistance for orders to Hawaii, Alaska, Puerto Rico or Canada. For shipping cost on international orders, please email or call 214-742-6066. We ship to APO and FPO addresses.

For comments or suggestions regarding Ergomart, email webmaster@ergomart.com. For questions and comments about our products and services, email service@ergomart.com.