Articulating Monitor Mounts depicted above:
75 x 75mm VESA
100 x 100mm VESA
100 x 200mm VESA

Articulating Tilter Head Configurations

The options depicted on the left handle LCD monitors weighing up to 33 pounds. These tilter head mounts swivel left to right, up and down, and rotate from landscape to vertical. This product is also available with a 200 x 200 VESA plate.

Call us at 888 420 3200 if you have a monitor that weighs more than 33 pounds; Ergomart offers a special Heavy Duty Monitor Mount Tilter Head.

Flush Mounts depicted above:
75/75mm and 100/100mm VESA
100 x 200mm VESA
200 x 200mm VESA

Simple Track mounts allow extremely low profile mounting of LCD monitors. The 7 inch slide track has two set screws that allow the mount to be locked in place. The Flush Mount handles monitors weighing up to 40 pounds. Monitors cannot be moved up and down until the set screws are loosened and the bracket is slid up or down to a new setting.

Flush Rotating Mounts depicted above:
75 x 75mm VESA
100 x 100mm VESA
100 x 200mm VESA

Rotating Mount LCD Monitor Options

Our rotating VESA mount options allow instant and smooth movement of the LCD from horizontal to vertical. Simply grasp the monitor on the outside opposite edges and turn it like a steering wheel. Two set screws firmly keep the mount in its vertical position. Like the other mounts designed to attached to the track, the mount can only be moved by loosening the set screws.

MSU4X6 Adapter Plate

Large LCD, Plasma, and LED Monitor Mounting

For larger monitors, consider the optional MSU4x6 VESA Adapter Plate, which adapts to monitors with hole patterns as small as 100 x 300 mm and as large as 400 x 600 mm. It works great for other sizes such as 100 x 400 mm, 200 x 400 mm and 200 x 600 mm.

This large format adapter will handle monitors weighing up to 75 pounds. It interfaces with most flat panel devices from 37 to 46 inches. The handy conversion table below will help you convert your measurements.

All VESA plate measurements are typically described in millimeters.  Measure the distance between the screw holes on the back of your monitor to determine the VESA hole pattern. The chart below converts the millimeter measurements into inches:

Please see the monitor mount section of the specification drawings page for more information.

Note: the optional Monitor Mount Extensions for Articulating Mounts are not compatible with the EGT MSU4X6 or Flush Mounts or Rotating Flush Mounts. (Learn more about our selection of monitor mounts on the general specifications page.)