Keyboard Platform Swivel

Here is a typical configuration of the COMBO 3 using the 39" Extended Capacity Wall Track. The image illustrates the swivel range at the keyboard tray attached to the single 7.5 extension arm. The keyboard tray can swivel until it touches the wall or even further where the installation configuration allows. For this image, we've used the EGT 26 inch keyboard tray, which allows ample room for a keyboard and mouse.

Complete Negative And Positive Keyboard Control  
Choose from a number of trays that fold up or down.  The keyboard is attached with Velcro strips that we provide. 

Looking for a different computer keyboard tray? That is definitely an option. See our keyboard section for keyboards and mouse trays that easily lend themselves to the COMBO 3 1HD Wall Track Mount configuration.

Excellent Flat Screen Monitor Control

With the COMBO 3, monitor adjustments are a breeze: LCD arms can be pointed in completely different directions, pulled forward, folded back, swiveled in tandem. The triple articulating arm design is the key to the flexibility of the dual arms on the HD Wall Track COMBO 3.

Swivel one monitor in front of you and simultaneously share information with a coworker, customer or client on the other monitor. Each person can tilt the monitor up or down, to the left or right to avoid glare and neck craning and straining. With the COMBO 3 Dual Monitor Mount, there's no more crowding around one monitor.

Dual Flat Screen Monitor Arms Lateral Reach

Thanks to the middle joint arm, you can pull both monitors closer to you or keep them neatly pushed back so they are folded just inches away from the wall. That's the power of dual arms on the HD Wall Track COMBO 3.

Imagine using this configuration for standing work: it is very easy to quickly use the computer for data entry or file access and then fold the arms out of the way and walk away.

Return to COMBO 3 Dual Monitor Mount details page.

You'll enjoy the range of lateral reach of these Dual Monitor Arms. Review the specification drawings related to monitor arm extension and fold-up capabilities on the COMBO 3 Specification page.

Rotate From Landscape To Portrait In Seconds

If your workstation requires frequent monitor orientation changes, you have found the right tool with the HD Wall Track Mount COMBO 3. Simply grasp and rotate—it could not be easier or quicker. Tilt the monitors up or down instantly with very little effort.

Tilt your LCD monitors a little or a lot, both negative and positive tilts. Avoid sunlight and window glare by modifying the tilt of your screens with fingertip ease.

Keep private information private (above, right). Need to walk away from your computer for a moment while personal or confidential files are in use? Just place your monitors in the extreme negative tilt position.

Height Adjustment of Monitors

To the left, the Dual Monitors are shown in portrait mode at the highest setting on a 12 inch mounting pole. While the wall track mount affixes securely to the track, the dual monitor arms may be raised or lowered by loosening the pole collar and carefully lifting the dual arm assembly.  This may require an extra hand but can be accomplished in less than 90 seconds. Basically the COMBO 3 system allows for occasional changes to the height of monitor arms, but it is not designed for instant height adjustment.

See measurements and information on the COMBO 3 Specifications page.

The 26 inch long keyboard tray with two removable mouse clips for mouse wire management is featured in this image. See all of the COMBO 3 keyboard tray options.

QUAD Mount (2 + 2 Side By Side Monitors)

With the 2 + 2 Quad Monitor option, when the pole is placed near the top of the track it can add extra vertical reach to the entire assembly. This Wall Mount securely handles four 22 pound flat screens in a landscape or portrait setting and comes with a 25 inch pole.

On the right, the optional NPE Premium Articulating Keyboard Tray is shown with the 2 + 2 Quad Monitor Arm on a black HD Wall Track Mount. The soft-touch tray wipes clean and accommodates a full size keyboard and mouse. 

See a review of available keyboard trays for the COMBO 3.

Keyboard Tray Arm Extensions

The COMBO 3 System comes standard with a 7.5 inches Keyboard Tray Extension Arm, shown far left. The middle image shows the combination 3.5 and 7.5 inch Keyboard Tray Extension Arm and the right image shows the most extreme reach comprising two 7.5 inch Keyboard Tray Extension Arms. This third option (dual 7.5" keyboard tray arm) is a popular configuration because the triple articulating arm allows maximum extension from the wall; the user is further from the monitors at a more comfortable 20 inch range. This configuration is best utilized where there is not desire for vertical storage of the tray.

Want your CPU on the bottom of the wall track mount instead of the top? Not a problem with the longer 49 inch HD Wall Track Mount. (See the longer track used in this image of the HD Wall Track COMBO 2; the 49 inch track gives you plenty of room to place your CPU at the base of the wall track with room for its height.) Please call us (888 420 3200 or 214 742 6066 ) if you're not sure about an option or need a specialty fix; we will do our best to accommodate you.

Don't see what you need? Have more questions? We are here to help—let use find a solution to your problem with our heavy duty multi-purpose Wall Track Mounting System. Call us at 888 420 3200 or 214 742 6066 or email us. And don't forget to check out the other options with our COMBO 1 HD Wall Track, COMBO 2 HD Wall Track and COMBO 4 HD Wall Track; one of these might be just what you need.