In most cases the answer is no, the iLander iLX2 bracket component is not adjustable and was specifically designed to hold iPad 2, 3 and 4 models without skins (some very thin skins will work however). It will fit other devices if the dimensions are no smaller than 9.375 x 7.250 x .300 inches and no greater than 9.5 x 7.5 x .750 inches.
Talk to an ergo expert: (888) 420-3200 or Email Us
SKU
ILX2-9110SKIT
Quick Release Wall-Mounted iPad Bracket for Grab-and-Go Convenience
- Ideal for tablet applications requiring heavy touchscreen use
- Secure or remove your iPad in the blink of an eye
- Once inserted, the iPad is captive, and will not fall or pop loose
- Easily tilt iPad up parallel to ceiling or down 45 degrees
- Adjustable tilter swivel and tilt resistance
- Quickly and easily rotates iPad from portrait to landscape
- Wall mounted iLander extends 6” from the wall
- Extensions of 3.5” and 7” provide two points of articulation
- Combining two extensions provides three points of articulation
- Wall mount and extensions standard in black, white, metallic gray
- Supports iPad 2, 3, and 4. Not suitable for other tablet sizes
The iLX2-9110S is a convenient and sturdy ergonomic solution for applications requiring temporary positioning of a tablet near a wall yet within easy reach. The iLander’s unique design provides unmatched convenience and peace of mind: instantly snap your iPad into the iLander X2 and it will be firmly positioned there until you are ready to release it by engaging two swinging latches. The ILX2-9110S provides a sturdy wall mounting solution allowing the iPad to be positioned against the wall or at a desired distance from it using several extension options that can be configured to satisfy a variety of spatial requirements. The iLander iLX2 is designed to fit iPad 2, 3, and 4 using no skins or covers.
This system has numerous applications: in hospital environments, in recording studios, mounted to a wall adjacent to a bed, near personal fitness equipment, or simply anywhere a person wishes to safely suspend an iPad and then have the ability to instantly remove the unit. The inertia due to the steel construction of the bracket and the adjustable tilt and swivel resistance of the mount make this system well-suited for touchscreen use. The iLander and the extensions won’t wiggle or scoot away when used in typical applications.
The wall mount and extensions are constructed from cast aluminum and steel components and are designed for use in commercial and medical applications and have a proven track record for strength, steadiness, ease of movement and long term performance. Ergomart stocks the iLander bracket in Black, but the mount and extensions may be ordered in up to five colors.
| Shipping Weight | 9 pounds |
| Shipping Dimensions | 17" x 14" x 9" |
| Warranty | 5 year limited |
| Note: Currently not a Quick Ship item. | |
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
MORE THAN 20 MOUNT OPTIONS
INTEGRATES WITH FOUR SYSTEMS
SERIES-118
VIEW ALL SIMILAR MOUNTING DEVICES
MOUNT KITS
VIEW COMPATIBLE INSTALLATION OPTIONS
EXPLORE
RECENT CUSTOM PROJECTS
LEARN
READ THE SERIES-118 REFERENCE GUIDE
CONSULT
[email protected] | 888 420 3200
|
iLX2-9110S
MOUNTING PLATE AND SIDE VIEW
iLX2-9110S
3.5" EXTENSION
iLX2-9110S
7" EXTENSION
iLX2-9110S
ARTICULATING 7" EXTENSION
iLX2-9110S
ARTICULATING 10.5" EXTENSION
iLX2-9110S
ARTICULATING 14" EXTENSION
iLX2-9110S
TOP VIEW
iLX2-9110S
3.5" EXTENSION - TOP VIEW
iLX2-9110S
7" EXTENSION - TOP VIEW
iLX2-9110S
ARTICULATING 7" EXTENSION - TOP VIEW
iLX2-9110S
ARTICULATING 10.5" EXTENSION - TOP VIEW
iLX2-9110S
ARTICULATING 14" EXTENSION - TOP VIEW
iLX2-9110S
ARTICULATING 7" EXTENSION - TOP VIEW
TABLET TURNED 90°
iLX2-9110S
ARTICULATING 10.5" EXTENSION - TOP VIEW
TABLET TURNED 90°
iLX2-9110S
ARTICULATING 14" EXTENSION - TOP VIEW
TABLET TURNED 90°
iLX2-9110S
ARTICULATING 7" EXTENSION - SIDE VIEW
TABLET TURNED 90°
iLX2-9110S
ARTICULATING 10.5" EXTENSION - SIDE VIEW
TABLET TURNED 90°
iLX2-9110S
ARTICULATING 14" EXTENSION - SIDE VIEW
TABLET TURNED 90°
-
Will this device accept other tablets?
-
The skin on my iPad is very thin, are you sure it won’t fit in the iLX2?
Please carefully measure your ipad and skin and if it is less than 9.5 x 7.5, it will fit. If not, you will want to use the adjustable iLA1.
-
I like the sleek and simple look of this iLX2 and prefer it over the adjustable iLA1… but I have a Dell XPS 10.1 tablet. What are my options?
You can contact Ergomart to see if we are currently considering adding a production model that is compatible with your specific device. Also we are able to do short production runs as small as 48 units in some cases if you can meet such a minimum requirement. It is best to simply contact an Ergomart representative for assistance.
-
I need an iLander for my iPad and it has a thick skin, do you offer any other solutions that allow me to instantly insert or remove my iPad?
Please choose one of the iLA1 models that are designed to hold a wide variety of tablets made by numerous manufacturers. While the highly adjustable bracket is more expensive than the fixed iLX2, it will fit almost all 8.9 to 12 inch tablet products. Tablets with dimensions no less than 8.875 x 6.5 x .325 inches and no greater than 13.125 x 10 x .75 inches will easily fit the iLA1.
-
I have a 2” thick tablet and I see your offerings max out at about .75” thick. Can I use your product and make it work somehow?
We can provide custom extensions that will fit tablets as thick as 4” and still provide the same instant snap-in and snap-out functionality.
-
Does this product allow me to lock my iPad in place so it is not easily stolen?
No – the iLX2 is designed for instant snap in and instant snap out utility and should only be used in environments where there is no concern of theft. See our tablet and iPad reference guide to select a theft resistant solution.
-
Why is the iLander so heavy, I guess I thought it would be lighter weight?
The iLX2 and iLA1 or purposefully designed with heavy steel back plates. The weight (mass) enables the pads to A: resist casual and unintended movements when the user is actively touching the screen and B: provides a payload compatible with the weight range of most of our monitor arms.
-
What is the weight range of this arm if I remove the iLander Bracket and use it to hold a regular VESA compliant monitor?
This arm will hold monitors weighing between 4 pounds to 9 pounds.
-
Can I just order the iLander Bracket by itself – will it attach to other monitor arms?
Yes you may order the iLX2 for $54.50 plus shipping by calling in your order at 888 420 3200 -- and yes the iLander will attach to all 100 x 100 VESA hole pattern capable arms. If you plan to attach to an arm with a gas spring or a mechanism that counter balances the weight of the payload, make sure that your arm will balance 4.5 pounds. If the arm is not adjustable down to 4.5 pounds, you will be unable to lower the iLander and iPad for a fully functioning solution.
-
Are screws included to mount this on the wall?
No, hardware is not included. Contact Ergomart for assistance determining the best hardware solution for your application.
-
Will this product work with my iPad still in its case?
This tablet holder is not designed to work with a case, however some thin cases may work. Contact customer support with the model of your case and we will help you determine if it will work with this solution.
-
If I order the 3.5" extension will I be able to rotate the tablet a full 180 degrees?
Yes, the tilter mechanism allows landscape to portrait rotation.
More Products You Might Find Interesting
