Talk to an ergo expert: (888) 420-3200 or Email Us
Our WMHA24125 articulating wall mount arm supports most LCD, LED and Plasma TV monitors up to 125 pounds and from 32 to 50 inches. While it extends out to over 24 inches, it can also fold back within 4 inches of the wall. The plate tilts to adjust viewing angle with an easy-to-use tilt lever. Adjust the resistance at each of the three hinge joints to either be easily moved, highly resistant to movement, or adjusted to suit any requirement in between. The black finish compliments most LED TV or LCD screens and it provides integrated cable management along both of the base arms to keep the look clean. Importantly, this product will attach to stud walls of 16" on center or 24" on center. The wall mount fits all VESA patterns between 100mm x 300mm and 400mm x 600mm.
|Shipping Weight||27 pounds|
|Shipping Dimensions||30" x 13" x 5"|
|Warranty||3 year limited|
Please call for expedited or international shipping.
When fully extended, the cantilever wall mount arm reaches out over 24.25 inches from the wall.
When completely folded, the retractable wall mount arm extends only 4" from the wall.
The VESA plate can attach to VESA patterns from 100mm x 300mm up to 400mm x 600mm. Various dimensions are illustrated.
At its most narrow configuration the MSU 400x600 can accomodate monitors with hole patterns as small as 7.67 inches.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.