The EC-TRACK Wall Track System features three compact modular monitor mounts that can be attached to any EC-TRACK rail. They are made specifically for the EC-TRACK and cannot be used with other SERIES-118 base systems. The low profile modular monitor mounts can be used on their own on an EC-TRACK Wall Track, in combination with other EC-TRACK modular products (e.g. Keyboard Mounts or CPU Holders) or in conjunction with the wide range of components available in SERIES-118. They are offered as selections when purchasing the EZ-EC1 Complete Kit, which provides all of the resources necessary for a full system. However, when these mounts are purchased individually, the EC-TRACK Rail must also be purchased separately.
FLUSH MOUNT
ROTATING FLUSH MOUNT
ARTICULATING MOUNT
FLUSH MOUNT
The Flush Mount is the most compact and simple of the low-profile modular mounts. It offers no tilt, swivel or rotation capabilities, but places the attached monitor only 2.19” away from the wall mounting surface, when used with the standard 75 x 75mm or 100 x 100mm VESA. It is also the most heavy-duty mount - capable of supporting up to 100 lb. Monitors greater than 30 lb have VESA sizes larger than 100 x 100 mm - and the Flush Mount can support these too. 100 x 200 mm and 200 x 200 mm plates are available, as well as the sliding MSU4X6, which accommodates any VESA size from 100 x 300 mm to 400 x 600 mm - perfect for monitors on the heavier side.
FLUSH MOUNT
FRONT VIEW - 75/100MM
TOP VIEW - 75/100MM
Additional images, specifications and further information can be found on the Flush Wall Track Monitor Mount product page.
ROTATING FLUSH MOUNT
The Rotating Flush Mount provides smooth portrait/landscape rotation while still maintaining a very minimal footprint. With the standard 75 x 75 mm and 100 x 100 mm VESA plate, the mount places the back of the attached monitor 2.61” from the wall mounting surface. The mount supports monitors up to 35 lb in weight. Monitors at the heavier end of this limit may have larger VESA mounting hole patterns. The Rotating Flush Mount has 100 x 200 mm and 200 x 200 mm VESA plate options to support monitors with these patterns.
The Articulating Mount is the most adjustable of the Low-Profile Modular Mounts, providing tilt, swivel and portrait/landscape rotation for the attached VESA-compatible monitor while still remaining a close distance (approx. 6.4”) from the mounting surface. The mount handles monitors up to 35 lb and comes standard with a VESA bracket supporting 75 x 75 mm and 100 x 100 mm monitors. Monitors on the larger side can be accommodated by optional 100 x 200 mm and 200 x 200 mm VESA plates. The monitor is free to swivel left and right until the edge of the monitor comes in contact with the mounting surface. It can also tilt back 90 degrees and down 45 degrees, but these will also be impeded by the mounting surface, which is depicted in the specification image below.
Both swivel and tilt can typically be increased by adding an extension. The extension will also provide additional reach and articulation points to the mount but the monitor can still be moved back towards the track for a compact footprint. The extensions can be bought in several lengths: single extensions of 3.5-inch or 7-inch lengths, or in a set of 2, 2 3.5-inch or 1 3.5-inch and 1 7-inch.
The modular mounts provide some great low-profile options for the EC-TRACK and are the right choice for many users, but if you need a height-adjustable arm for your system, Ergomart’s SERIES-118 components provide a wide range of arms with varying weight capacities and adjustability options that are easy to attach to an EC-TRACK with an MKIT-F mounting kit. With so many options available, Ergomart is always happy to help guide you to a solution. Don’t hesitate to contact us at 888 420 3200 or [email protected] so you can leverage our team’s knowledge and experience.