Mount Kits for Arms and Stands

Anchor Links: Mount Kit A | Mount Kit C | Mount Kit D | Mount Kit E | Mount Kit F | Mount Kit G | Mount Kit J | Mount Kit K | Mount Kit L | Mount Kit M | Mount Kit R | Mount Kit S|

Ergomart offers a broad range of mounting options. Kit A and Kit C are the most popular kits. Either of the two adaptable mount kits can be configured as desk clamps, wall mounts, through-desk mounts and box edge mounts. Other available mounting kits are designed for specific uses and/or specific products. If you are buying a mount as a retrofit to an existing installation, check with Ergomart to insure your replacement is compatible. If you see that the mount you wish to use is offered with the product you already own then you can purchase the new mount kit from the mount kit purchase page.

Most Ergomart Mounting Arms and Stands that begin with the letters SAA, SA and LS are compatible with more than 15 mounting solutions.

Additionally, Ergomart will work with customers to develop custom mounting solutions designed to meet specific needs. Several unadvertised mounting solutions exist that can be applied to meet atypical situations. Contact Ergomart today if you do not see the solution that meets your requirements.

These Ergomart mounts do not come with fasteners to fasten to a wall or vertical surface. Installer must supply screws and bolts depending on the conditions and requirements of the given installation.

Not compatible with SXA66 and SCA2321.

MOUNT KIT A

Mount Kit A is a flexible mount kit that can be configured in one of 5 configurations: Desk Clamp, Desk Clamp (modified L bracket), Through-Desk, Wall Mount and Reverse Wall Mount.

DESK CLAMP MOUNT CONFIGURATIONS

KIT A - ISOMETRIC VIEW

KIT A - FRONT VIEW

KIT A - SIDE VIEW

KIT A - TOP VIEW

Line drawing: Kit A desk clamp mount MOUNT KITS FOR ARMS AND STANDS MOUNT KITS FOR ARMS AND STANDS MOUNT KITS FOR ARMS AND STANDS

KIT A - SIDE VIEW - MINIMUM CLAMP POSITION

KIT A - SIDE VIEW - MAXIMUM CLAMP POSITION

KIT A - SIDE VIEW (MODIFIED L BRACKET) - MINIMUM CLAMP POSITION

KIT A - SIDE VIEW (MODIFIED L BRACKET) - MAXIMUM CLAMP POSITION

MOUNT KITS FOR ARMS AND STANDS Line drawing: Kit A desk clamp mount MOUNT KITS FOR ARMS AND STANDS MOUNT KITS FOR ARMS AND STANDS
If a table skirt or other obstruction runs along the underside of the surface, it must be 2.75" or greater from the table edge using this configuration. The small L bracket can be repositioned so that if a table skirt or other obstruction runs along the underside of the surface and is as close as 1.5" from the surface edge, the clamp can still be affixed to the edge. WARNING: The arm should not be allowed to rotate out behind the surface as the clamp is not completely stable.

THROUGH-DESK CONFIGURATIONS

KIT A - ISOMETRIC VIEW

KIT A - FRONT VIEW

KIT A - SIDE VIEW

KIT A - TOP VIEW

MOUNT KITS FOR ARMS AND STANDS MOUNT KITS FOR ARMS AND STANDS MOUNT KITS FOR ARMS AND STANDS MOUNT KITS FOR ARMS AND STANDS

KIT A - ISOMETRIC VIEW

KIT A - FRONT VIEW - MINIMUM THROUGH-DESK POSITION

KIT A - FRONT VIEW - MAXIMUM THROUGH-DESK POSITION

KIT A - TOP VIEW

Line drawing: Kit A through-desk mount Measurements: Minimum attachment surface thickness: 1 inch, bolt diameter: .38 inches, washer width: 3 inches Measurements: Mount height: 4.5 inches, mount width: 1.88 to 2 inches, maximum attachment surface thickness: 1.75 inches Measurements: Mount attachment point diameter: 2 inches, mount attachment point radius: 1 inch, washer width: 3 inches, washer depth: 0.75 inches

Longer bolts are available to accommodate thicker desk surfaces - please call to order.

WALL MOUNT CONFIGURATION

KIT A - ISOMETRIC VIEW

KIT A - FRONT VIEW

KIT A - SIDE VIEW

KIT A - TOP VIEW

Line drawing: Kit A reverse wall mount Measurements: Mount width: 1.88 to 2 inches, mounting hole diameter: .31 inches, mount height: 7.25 inches, mounting hole to mounting hole: 3 inches Measurements: Mount depth: 2.75 inches, attachment portion length: 2.62 inches, wall mount portion length: 4.62 inches Measurements: Mount width: 2 inches, mount depth: 2.75 inches, center of attachment to wall: 1.75 inches

REVERSE WALL MOUNT CONFIGURATION

KIT A - ISOMETRIC VIEW

KIT A - FRONT VIEW

KIT A - SIDE VIEW

KIT A - TOP VIEW

Line drawing: Kit A reverse wall mount Measurements: Mount width: 1.88 to 2 inches, mounting hole diameter: .31 inches, mount height: 7.25 inches, mounting hole to mounting hole: 3 inches Measurements: Mount depth: 2.75 inches, attachment portion length: 2.62 inches, wall mount portion length: 4.62 inches Measurements: Mount width: 2 inches, mount depth: 2.75 inches, center of attachment to wall: 1.75 inches

MOUNT KIT C

MOUNT KIT C is a flexible mount kit that can be configured in one of 5 configurations: Desk Clamp, Desk Clamp (modified L bracket), Through-Desk, Wall Mount and Reverse Wall Mount.

DESK CLAMP MOUNT CONFIGURATIONS

KIT C - ISOMETRIC VIEW

KIT C - FRONT VIEW

KIT C - SIDE VIEW

KIT C - TOP VIEW

drawing: kit c desk clamp mount Measurements: Mount width: 2.2 to 2.3 inches, mount hole diameter: .31 inches, mount height: 9 inches, bottom clamp plate thickness: .25 inches, bottom clamp plate width: 3 inches Measurements: Mount attachment length: 4.12 inches, mount clamp portion length: 4.88 inches, minimum clamp surface width: 2.75 inches, back of mount to front of bottom clamp plate: 2.75 inches Measurements: Mount attachment width: 2.3 inches, mount depth: 5.25 inches, mount width: 6 inches, mid attachment to back of mount: 2.25 inches

KIT C - SIDE VIEW - MINIMUM CLAMP POSITION

KIT C - SIDE VIEW - MAXIMUM CLAMP POSITION

KIT C - SIDE VIEW (MODIFIED L BRACKET) - MINIMUM CLAMP POSITION

KIT C - SIDE VIEW (MODIFIED L BRACKET) - MAXIMUM CLAMP POSITION

Measurements: Mount attachment portion length: 4.12 inches, clamp portion length: 4.88 inches, minimum clamp surface thickness: 2.75 inches, bottom clamp portion depth: 2.75 inches Measurement: Maximum clamp surface thickness: 3.88 inches Measurements: Minimum clamp surface thickness 2.12 inches, L bracket depth: 1.5 inches Measurement: Maximum clamp surface thickness: 4.5 inches
If a table skirt or other obstruction runs along the underside of the surface, it must be 2.75" or greater from the table edge using this configuration. The small L bracket can be repositioned so that if a table skirt or other obstruction runs along the underside of the surface and is as close as 1.5" from the surface edge, the clamp can still be affixed to the edge. WARNING: The arm should not be allowed to rotate out behind the surface as the clamp is not completely stable.

THROUGH-DESK CONFIGURATIONS

KIT C - ISOMETRIC VIEW

KIT C - FRONT VIEW

KIT C - SIDE VIEW

KIT C - TOP VIEW

Line drawing: Kit C through-desk mount Measurements: Mount width: 2.2 to 6 inches, mount height: 5.62 inches, mount top portion length: 4.12 inches, bolt length: 1.5 inches Measurements: Mount top portion length: 4.12 inches, bolt length: 1.5 inches, mount depth: 5.25 inches Measurements: Mount attachment diameter: 2.3 inches, middle mount attachment to back of mount: 2.25 inches, mount depth: 5.25 inches, mount width: 6 inches

KIT C - ISOMETRIC VIEW

KIT C - FRONT VIEW - MINIMUM THROUGH-DESK POSITION

KIT C - FRONT VIEW - MAXIMUM THROUGH-DESK POSITION

KIT C - TOP VIEW

Line drawing: Kit C through-desk mount Measurements: Bolt width: .38 inches, minimum attachment surface thickness: .63 inches, washer width: 3 inches Measurements: Mount attachment width: 2.2 to 2.3 inches, maximum attachment surface thickness: 1.75 inches, mount height: 5.75 inches Measurements: Mount attachment diameter: 2.3 inches, middle mount attachment to rear of mount: 1.15 inches, washer width: 3 inches, washer depth: .75 inches

Longer bolts are available to accommodate thicker desk surfaces - please call to order.

WALL MOUNT CONFIGURATION

KIT C - ISOMETRIC VIEW

KIT C - FRONT VIEW

KIT C - SIDE VIEW

KIT C - TOP VIEW

Line drawing: Kit C wall mount Measurements: Mount width: 2.3 inches, mounting hole diameter: .31 inches, mount height: 5.25 inches Measurements: Mount height: 5.25 inches, mount depth: 3.3 inches Measurements: Mount width: 2.3 inches, mount depth: 3.3 inches, middle of mount attachment to back of mount: 2.25 inches

REVERSE WALL MOUNT CONFIGURATION

KIT C - ISOMETRIC VIEW

KIT C - FRONT VIEW

KIT C - SIDE VIEW

KIT C - TOP VIEW

Line drawing: Kit C reverse wall mount Measurements: Mount width: 2.2 to 2.3 inches, mount hole diameter: .31 inches, mount hole to mount hole: 3 inches, mount height: 8.75 inches Measurements: Mount depth: 3.3 inches, mount attachment portion length: 3.75 inches, wall mount portion length: 5 inches Measurements: Mount width: 2.3 inches, mount depth: 3.3 inches, middle of mount attachment to back of mount: 2.25 inches

MOUNT KIT D

HEAVY-DUTY WALL MOUNT

KIT D - ISOMETRIC VIEW

KIT D - FRONT VIEW

KIT D - SIDE VIEW

KIT D - TOP VIEW

Line drawing: Kit D heavy-duty wall mount Measurements: Mount hole diameter: 0.35 inches, mount hole to mount hole: 6.75 inches, mount top portion length: 2 inches, mount attachment portion length: 5.3 inches, mount lower portion length: 2.12 inches Measurements: Mount attachment portion depth: 2.62 inches, wall mounting portion depth: .38 inches, mount height: 9.5 inches, mount top portion length: 2 inches, top mount attachment portion length: 2.62 inches, lower mount attachment portion length: 2.68 inches, mount lower portion length: 2.2 inches Measurements: Mount depth: 3 inches, mount width: 2.8 inches, middle of mount attachment to rear of mount: 1.31 inches

MOUNT KIT E

HEAVY-DUTY POLE MOUNTING KIT

KIT E - ISOMETRIC VIEW

KIT E - FRONT VIEW

KIT E - SIDE VIEW

KIT E - TOP VIEW

Line drawing: Kit E heavy-duty pole mount Measurements: Mount width: 4.25 inches, mount height: 2.5 inches Measurements: Mount depth: 4.75 inches, mount height: 2.5 inches Measurements: Mount attachment portion width: 2.25 inches, rear mount portion length: 3.25 inches, front mount portion length: 1.5 inches, pole mount diameter: 1.5 to 2 inches

MOUNT KIT F

HEAVY-DUTY TRACK MOUNTING KIT

KIT F - ISOMETRIC VIEW

KIT F - FRONT VIEW

KIT F - SIDE VIEW

KIT F - TOP VIEW

Line drawing: Kit F heavy-duty track mount Measurements: Mount width: 2.8 inches, mount height: 5.62 inches, single track mount width: .88 inches Measurements: Mount depth: 3.12 inches, mount height: 5.62 inches, mount attachment top portion length: 2.62 inches, mount attachment lower portion length: 2.68 inches Measurements: Mount depth: 3.12 inches, mount width: 2.8 inches, middle of attachement to rear of attachment: 1.31 inches

MOUNT KIT G

HEAVY-DUTY THROUGH-DESK MOUNTING KIT

KIT G - ISOMETRIC VIEW

KIT G - FRONT VIEW - MINIMUM POSITION

KIT G - FRONT VIEW - MAXIMUM POSITION

KIT G - TOP VIEW

Line drawing: Kit G heavy-duty through-desk mount Measurements: Minimum clamp surface thickness: .25 inches, bolt width: .38 inches, washer width: 3 inches Measurements: Mount width: 2.3 to 6 inches, mount height: 5.62 inches, top portion length: 4.12 inches, maximum clamp surface thickness: 1.12 inches Measurements: Mount attachment diameter: 2.3 inches, mount width: 6 inches, middle mount attachment to back of mount: 3 inches

MOUNT KIT J

DUAL HEAVY-DUTY POLE MOUNTING KIT

KIT J - ISOMETRIC VIEW

KIT J - FRONT VIEW

KIT J - SIDE VIEW

KIT J - TOP VIEW

Line drawing: Kit J dual heavy-duty mount Measurements: Mount width: 4.25 inches, mount height: 2.5 inches Measurements: Mount depth: 6.5 inches, mount height: 2.5 inches Measurements: Mount depth: 6.5 inches, mount attachment to mount attachment: 4.5 inches, mount attachment width: 2.25 inches, pole mount diameter: 1.5 to 2 inches

MOUNT KIT K

THROUGH-DESK COLUMN MOUNTING KIT

KIT K - ISOMETRIC VIEW

KIT K - FRONT VIEW - MINIMUM POSITION

KIT K - FRONT VIEW - MAXIMUM POSITION

KIT K - TOP VIEW

Line drawing: Kit K through-desk column mount Measurements: Bolt width: .38 inches, minimum mounting surface thickness: .63 inches, washer width: 3 inches Measurements: Mount attachment width: 2.2 to 2.3 inches, mount height: 5.75 inches, maximum mounting surface thickness: 1.75 inches Measurements: Mount attachment width: 2.3 inches, washer width: 3 inches, washer depth: .75 inches, middle mount attachment to rear of mount: 1.15 inches

MOUNT KIT L

DUAL DESK MOUNTING KIT

KIT L - ISOMETRIC VIEW

KIT L - FRONT VIEW

KIT L - SIDE VIEW

KIT L - TOP VIEW

Line drawing: Kit L dual desk mount Measurements: Mount attachment diameters: 1.88 inches, distance between mount attachments: 4.12 inches, washer height: .25 inches, lower mount width: 2 inches, top clamp portion width: 3.38 inches Measurements: Mount height: 10 inches, top mount portion length: 5.5 inches, clamp portion length: 4.5 inches, minimum clamp surface thickness: 2.38 inches Measurements: Clamp width: 7.88 inches, mid mount attachment to mid mount attachment distance: 6 inches, mount depth: 3.38 inches, mid mount attachment to rear of mount: 1.5 inches

KIT L - SIDE VIEW - MINIMUM CLAMP POSITION

KIT L - SIDE VIEW - MAXIMUM CLAMP POSITION

KIT L - SIDE VIEW (MODIFIED L BRACKET) - MINIMUM CLAMP POSITION

KIT L - SIDE VIEW (MODIFIED L BRACKET) - MAXIMUM CLAMP POSITION

Measurements: Lower clamp portion depth: 2.75 inches, minimum clamp surface thickness: 2.38 inches Measurement: Maximum clamp surface thickness: 3.62 inches Measurements: Lower clamp portion depth: 1.5 inches, minimum clamp surface thickness: 1.88 inches Measurement: Maximum clamp surface thickness: 4.25 inches
If a table skirt or other obstruction runs along the underside of the surface, it must be 2.75" or greater from the table edge using this configuration. The small L bracket can be repositioned so that if a table skirt or other obstruction runs along the underside of the surface and is as close as 1.5" from the surface edge, the clamp can still be affixed to the edge. WARNING: The arm should not be allowed to rotate out behind the surface as the clamp is not completely stable.

MOUNT KIT M

STATIONARY MOUNTING KIT FOR THE ROLLER TRACK

KIT M - ISOMETRIC VIEW

KIT M - FRONT VIEW

KIT M - SIDE VIEW

KIT M - TOP VIEW

Line drawing: Kit M stationary mount for roller track Measurements: Mount attachment width: 2 inches, mounting hole to mounting hole (vertical): 1.88 inches, mounting hole to mounting hole (horizontal): 5 inches Measurements: Mount depth: 2.88 inches, mount height: 3.62 inches, rear mount plate height: 2.88 inches Measurements: Mount width: 6 inches, mount attachment mount width: 1 inch, track mount portion depth: .25 inches

MOUNT KIT R

UNIVERSAL MOUNTING KIT FOR VERTICAL SURFACES

KIT R - ISOMETRIC VIEW

KIT R - FRONT VIEW

KIT R - REAR VIEW

KIT R - TOP VIEW

Line drawing: Kit R universal mount for vertical surfaces Measurements: Mount width: 2.8 inches, mount height: 5.3 inches, upper mount length: 2.62 inches, lower mount length: 2.68 inches Measurements: Mount width: 2.8 inches, mount hole diameter: .2 inches, mount hole to mount hole (vertical): 2.75, mount hole to mount hole (horizontal): 1.5 inches Measurements: Mount depth: 2.88 inches, mouth width: 2.8 inches, middle mount attachment to rear of mount: 1.31 inches

MOUNT KIT S

DOVETAIL MOUNTING KIT FOR HEALTHCARE AND MEDICAL APPLICATIONS

KIT S - ISOMETRIC VIEW

KIT S - FRONT VIEW

KIT S - SIDE VIEW

KIT S - TOP VIEW

Line drawing: Kit S dovetail mount Measurements: Mount width: 2.8 inches, mount height: 5.3 inches, upper mount portion length: 2.62 inches, lower mount portion length: 2.68 inches Measurements: Mount depth: 4 inches, upper mount portion length: 2.62 inches, lower mount portion length: 2.68 inches Measurements: Mount depth: 3.88 inches, mount width: 2.8 inches, mid mount attachment to rear of mount attachment: 1.31 inches