The EC-TRACK Wall Track System features two modular keyboard mounts that can be attached at any point to an EC-TRACK rail. They are made specifically for the EC-TRACK and cannot be used with other SERIES-118 base systems, but similar mounts are available that can be added to any base system. The modular keyboard trays can be used on their own on an EC-TRACK Wall Track, in combination with other EC-TRACK modular products (e.g. Monitor Mounts or CPU Holders), or in conjunction with the wide range of components available in SERIES-118. They are offered as selections when purchasing some EC-EZ Complete Kits, which provide all of the resources necessary for a complete workstation. Remember that when these keyboard mounts are purchased individually, the EC-TRACK Rail must also be purchased separately.
If you are looking for a similar keyboard tray for a different base system (such as a P192 pole mount or ROLLER TRACK) or on its own, please get in touch with Ergomart and we can point you in the right direction.
SIT-STAND KEYBOARD ARM
LOW-PROFILE MOUNT
LOW-PROFILE WITH OPTIONAL EXTENSIONS
SIT-STAND KEYBOARD TRAY ARM
The sit-stand keyboard tray arm provides exceptional mobility and adjustment for the attached keyboard tray:
Vertical adjustability: Over 15.5” of instant vertical travel, suitable for sit-stand capabilities for a majority of users
Horizontal adjustability: When fully horizontal, the arm extends 34.75” from the mounting surface to the tip of a standard keyboard tray and can fold down to just 6.5”
360° rotation at base: Rotates at the base where the arm attaches into the mounting kit
360° rotation at elbow: Rotates where the lifting arm meets the forearm
360° swivel at keyboard tray: Rotates at the tilter mechanism, where the keyboard tray is attached
90° up and 45° keyboard tray tilt: Tray can be folded away when not in use and adjusted for comfortable keying positions
ISOMETRIC VIEW
The keyboard tray has full swivel until the tray touches the arm, as well as 90° upwards and 45° downwards tilt. The keyboard arm has rotational articulation at the base, the elbow and the tilter mechanism.
HEIGHT ADJUST - SIDE VIEW
The keyboard arm provides over 15.5” of vertical adjustment to the keyboard and mouse, enabling sit stand use for most multi-user applications.
EXTENSION - TOP VIEW
The keyboard arm reaches out 34.75” from the mounting surface to the front edge of the 8.5” deep, 20” or 26” wide standard keyboard tray.
FOLDED - SIDE VIEW
When the keyboard tray is not in use, the arm can be folded back against the track and the keyboard tray folded up and stowed away creating a very minimal footprint, only 6.5” from the mounting surface.
The low profile keyboard tray packs plenty of adjustability even with a highly compact footprint:
90° up and 45° keyboard tray tilt: Tray can be adjusted for comfortable keying positions and can be stowed when not in use
360° swivel at keyboard tray: Rotates at the tilter mechanism, where the keyboard tray is attached
Optional 360° rotation at base: Use single or dual optional extensions to add an additional rotation point where the straight arm attaches into the mounting kit
Optional 360° rotation at elbow: Dual straight arm extensions add a rotation point where the two arms are connected
ISOMETRIC VIEW
The compact articulating keyboard tray mounts anywhere along the track. While it does not include instant height adjustment, it can be repositioned along the track when needed.
KEYBOARD TILT - SIDE VIEW
The tray folds upwards 90° to stow away when not in use. It also tilts downward up to 45°, providing additional flexibility.
SWIVEL - TOP VIEW
The tray can swivel from side to side, inhibited only by the edge of the tray meeting the mounting surface.
WITH EXTENSIONS - TOP VIEW
Optional extensions provide up to 10” of reach and additional articulation points. Extensions can be purchased as
Single 3.5-inch segment
Single 7-inch segment
Two 3.5-inch segments
7-inch and 3.5-inch segments
The Low-Profile Keyboard Tray Arm is an option within the EC-EZ1 Fixed Height Complete Kit and the EC-EZ3 Multi-Monitor Complete Kit which both include all components to build an EC-TRACK system. The keyboard mount is also available as a stand-alone product to be added to an EC-TRACK rail and other modular components purchased separately.
With so many options available, Ergomart is always happy to help guide you to a solution. Don’t hesitate to contact us at 888 420 3200 or [email protected] so you can leverage our team’s knowledge and experience.