Talk to an ergo expert: (888) 420-3200 or Email Us
You can't beat this VESA compatible wall mount for handling flat screens from 17 to 32 inches. It is finely engineered, functional and available with handy extension options. Excellent for use with touch screens and panel PC products. Set the adjustable tilt and swivel resistance to suit your precise need and then never worry with levers or knobs—simply grasp your LCD and gently and intuitively move it to the preferred position.
With the Standard Tilter Head, the WM9110T handles LCD weights a maximum of 35 pounds. Weight capacities are reduced as follows when extensions are used: 3.5 inches up to 33 pounds; 7 inches up to 28 pounds; 10.5 inches up to 22 pounds.
With the Heavy Duty Tilter Head The WM9110T Tall Wall Mount handles up to 40 pounds. No extensions should be used with the Heavy-Duty Tilter Head.
Shipping Weight | 4 pounds |
Shipping Dimensions | 7" x 6" x 4" |
Warranty | 5 year limited |
Professional installation is always recommended for all wall mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
When used in conjunction with the extension arms, the reach and swivel and tilt capabilities are greatly enhanced—tilter pivots 90° back and 44° down!
Extensions increase reach of the WM-9110: 4 inch increases reach by 3.5 inches, 8 inch increases by 7 inches and 12 inch increases reach up to 11 inches.
|
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.