THE MONITOR ARM WITH KEYBOARD TRAY COMBO SOLUTION FOR HEAVIER MONITORS AND SMALLER VESA COMPLIANT LCD AND LED TVs

Our new TRS7000 LCD Arm Keyboard Tray Combo handles light duty and intermittent use. Ideal for moderate use in office, medical, technical and light industrial settings. The TRS7000 works with LCD monitors weighing as much as 16 pounds. The system allows for movement of the keyboard tray and monitor over a wide area and with more than 15 inches of vertical travel. It can be configured for use with a keyboard only or for a keyboard and mouse. Both monitor and keyboard tray can be tilted to most required angles. The keyboard tray can be flipped up and out of the way when not in use. The arm and tray rotate 360 degrees with three points of articulation while cables are routed beneath both major arm components. A mouse holder is also included with the wider tray option.

TRS7000 Monitor Arm Keyboard Tray Features


  • Cable management routes wire under arm segments
  • Over 15.25" of vertical travel when wall mounted
  • Tray moves forward to 37" yet folds compactly
  • Keyboard is securely affixed to tray with velcro
  • Effortlessly float LCD monitors up to 16 pounds
  • Works with LCD monitors as light as 6 pounds
  • Choice of two LCD monitor weights: see buy box
  • Sit or stand and comfortably view your LCD
  • Monitor is vertically adjustable above tray
  • Select Black, Metallic Gray or Matte White
  • Easily mounts to desks, walls and poles
  • Standard lead time is 3 to 8 days
  • Next Day Shipping is $75 in the lower 48
  • Questions? 888-420-3200 8:30 am–6 pm CST
Shipping Weight 19 pounds
Shipping Dimensions 26" Tray: 26 x 18 x 8 inches
Warranty 5 Year limited

Black is our quick-ship color. Please call for large quantity discounting: 888-420-3200.

Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.

 

black    metallic grey    white
TRS7000 Base Price (with Mount Kit A): $338.85
Some options might change depending on previous selection
General Quick Reference Box Ergomart's Reference Guide
ergomart checkout
Features


The Mouse Trap manages your mouse cable and traps the mouse when the keyboard tray is folded up.

The MouseTrap is included with the 26" tray. Clip it at the back of either end of the tray. The MouseTrap securely cradles the mouse when the keyboard tray is folded into the vertical position and allows instant access when the tray is opened flat.

 

Adjustability
Three images depicting lcd keyboard tray arm rotation at base, elbow and behind monitor. The TRS7-BB103 Data entry arm is a triple articulating mounting system.
Swivel at the base
Swivel at the elbow
Swivel the monitor head
Three images depicting extension and retraction, vertical adjustment range and tilting. The TRS7-BB103 is highly adjustable and compact.
Fold to the wall or out 37"
Adjust for a variety of heights
Tilt up or down for perfect viewing
Specifications
TRS7000 LCD monitor arm with keyboard tray showing measurements with the mount fully extended in maximum and minimum positions
The TRS7-BB103 LCD monitor arm with keyboard tray has a total vertical travel range of over 15" providing there are no obstructions.
TRS7000 LCD monitor arm with keyboard tray showing measurements with the mount fully extended and folded with the keyboard tray down
The TRS-BB103 extends out over 37" from the wall and folds in to 17.5" from the wall with the keyboard tray still extended.
Adding vertical extensions allows a desk mounted version of the TRS7-BB103 to deliver a greater range of vertical travel.
Adding extensions can increase the total vertical travel and maximum height of the arm if it is obstructed by a desk.
TRS7-BB103 LCD monitor arm with keyoard tray showing measurements of the two VESA placements and the arm and keyboard tray folded
The monitor is adjustable along the 6.6" monitor mounting slot allowing for precise positioning. When the arm and tray are completely folded, the arm extends only 8.25" from the wall.
FAQs

Q: How much vertical travel does this arm have? Is it 12 inches or 15 inches?
A: The amount of vertical travel is dependent on mounting method of the arm. With a wall mount, slat wall or pole mount, the full 15 inches potential for vertical range is available. However, when mounted to a work surface the lower end of the range becomes restricted by the surface itself to 12 inches. By using a 6 inch vertical extension available from Ergomart, the arm can typically reach its maximum vertical range even when mounted to a horizontal surface.


Q: My drafting table is at a 45 degree angle, can I clamp the arm to the edge of my surface?

A: No, this monitor arm MUST be mounted to either a horizontal surface or a vertical surface to function properly.


Q: Can I mount this upside down to the ceiling or to the bottom of a surface?

A: No, but Ergomart does have other solutions for ceiling or under surface mounting: 888 420 3200 or 214 742 6066 or sales@ergomart.com


Q: What does the 5 Year Limited Warranty mean?

A: In general, the warranty is 5 years from the ship date of the product. The warranty covers the entire assembly against premature wear and defects. The gas spring cylinder is covered to maintain 95% of its stated maximum load at the time of purchase.
Performance in 24/7 environments is warranted at 3 years.
Customers pay for shipping of their product back to the factory for repairs. ALL returned products must have a return authorization, which is provided by Ergomart via fax or email.


Q: My mounting surface is 3 inches thick but your Flexmount says that its through-desk configuration only goes up to 1.75 inches. Is through desk not an option for me?

A: Please call Ergomart to request a custom bolt that is long enough to fit your needs: 800 420 3200.


Q: Is Landscape to Portrait rotation possible with this Arm and Data Entry Combo?

A: Absolutely! The height-adjustable slider VESA plate allows for full 360° rotation of the monitor while keeping the keyboard tray stationary.
The thumbscrew behind the monitor can be used to adjust the friction-resistance to rotation.


Q: Can I mount an Apple iMac or Cinema Display on this combo?

A: Yes and No: this LCD Arm Keyboard Tray Combo will handle a smaller Cinema Display or monitor that weighs less than 16 pounds. However, we do have other products that will work with the heavier 30" Cinema Display and a 27" iMac. You may order a Heavy Duty TRS2415-BB103 Arm and Data Entry Combo to accommodate monitors and iMacs weighing approximately 30 pounds.

 

Instructions

Monitor Arm with Keyboard Tray TRS7000
Product documentation and instructions can be viewed or downloaded here:

monitor arm TRS7000 Instructions
Monitor Arm & Keyboard
Tray TRS7000
Instructions

monitor arm TRS7000 Instructions
Flex Mount Kit Instructions
Popular Items Also Available From Ergomart
Monitor Arm

SAA2415 Heavy Duty Arm


Heavy Duty SAA2415

One of our toughest (yet attractive) LCD monitor arms! The SAA2415 floats big LCD monitors, LED displays, touch screens and even small flat screen TV monitors up to 62 pounds.

Mounts with Keyboard Trays

TRS2718-BB103


Mounts with Keyboard Trays

The TRS2718-BB103 Monitor Arm Keyboard Tray Combo features excellent cable management and substantial reach.  It is appropriate for frequent adjustment of height (nearly 18" of instant, effortless vertical float) in extended positions.

Light Filters

Visibility Ergomart

Ergomart offers an extensive lineup of fluorescent light filtering products. Our filters virtually eliminate all UV wavelengths below 380 nanometers. We offer several versions of these lighting filters that offer various levels of beneficial properties.

Wall Track Mount

Heavy Duty Track COMBO 2


Wall Track Mount

Our COMBO 2 Data Entry System is a true Sit Stand LCD and Keyboard Track Wall Mounted Solution that can be configured for ADA compliance. In its base configuration, the COMBO 2 has two articulating arms with more than 15.5 inches of vertical travel.

Monitor Arm

SAA7000 Monitor Arm


Heavy Duty SAA2415

Our high-performance VESA compliant LCD-LED Arm handles your LCD monitors and touch screen monitors with ease. It is finely engineered and constructed from die cast and finely machined powder coated aluminum components.