Talk to an ergo expert: (888) 420-3200 or Email Us
Our WMHA2480 LED and LCD articulating wall mount supports most TV and LCD monitor screens from 23 to 37 inches and up to 80 pounds. While it extends out to 23.5 inches, it can also fold back into a mere 2.5 inches from the wall. The plate tilts to adjust viewing angle with an easy-to-use tilt lever. Resistance to movement can be adjusted—each joint can be individually set for easy movement or to be highly resistant. The black finish compliments most LED TV or LCD screens and it provides cable management along both of the base arms to keep the look clean. The standard mount fits 75mm x 75mm, 100mm x 100mm, 100mm x 200mm, and 200mm x 200mm VESA compliant screens, though it can be fitted with an optional adapter plate to fit VESA patterns from 100mm x 300mm up to 400mm x 600mm.
WMHA2480 Wall Mount
Shipping Weight | 13 pounds |
Shipping Dimensions | 16" x 15" x 3" |
Warranty | 3 year limited |
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
Please call for expedited or international shipping.
|
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.