Goldtouch |
- The
Goldtouch keyboard angles/tents in the center up to 30°
- The
Goldtouch computer keyboard separates (splits) up to 30°
- It
is easily adjusted with locking ball and socket latch mechanism
- Superior
feel and low noise keys are benefits of rubber domed springs
|
Comfort |
- Adjusts
to eliminate wrist pronation and ulnar deviation
- Remapping
features and macros extend the flexibility of this product
- Qwerty layout makes it easy to quickly re-establish typing speeds
- Keypads tilt an amazing 0° to 90° and rotate 360°
on track
|
ErgoMagic |
- ErgoMagic™
is a lower priced version of the the Comfort keyboard
- Each section can be placed as needed
- Tilt angles may be set to 20°, 30° or 45°
- Also available: the ErgoFlex keyboard with non-tilting sections
|
Wave
Form |
- Designed
to reduce wrist discomfort and injuries
- Places hands and wrists
in a more natural, ergonomic posture
- Eliminate the need for a separate mouse—use the
built-in touchpad
- Serial mouse port included—external operation with switch selection
- This keyboard saves desk space since no mouse is required
|
OGKTB003 |
- Large trackball keyboard with three standard mouse buttons
- Trackball has 400 dot per inch (DPI) count opti-mechanical
mouse
|
OGKTB005 Trackball |
- Premium ergonomic trackball with three mouse control buttons
- Extra-large 51 opti-mechanical trackball with drafting
quality resolution
|
ADOMN010 Numeric Keypad |
- 88/89 key keyboard with embedded numeric keypad
- 12 dedicated function keys
- Compact design opens up room on your desk
|
ADO-SPKB011 Flexible Keyboard |
- Water resistant, flexible keyboard for wet and dusty
environments
- USB with PS2 adapter
- Folds and stores easily—great for portable use
|
ADO-SPKB012 |
- Full size flexible keyboard resists water and
dust
- Comes with numeric keypad area and is both USB and PS2
compatible
- Folds and fits easily into bags, pockets, briefcases, and purses
|
IS-ER |
- Tray
is counter-balanced for effortless height adjustment
- Swivel
tilt mouse platform with gel rest is 1 of 4 standard options
- Welded
steel arm design assures maximum stability
- Positive/negative
tilt (±15°) easily actuated with ergonomic lever
|
IS-LS |
- Dual stage mechanism stows like a short arm yet extends for ease of use
- Fits in tight corners and areas with a short return
- Great space-saving configuration
- Get maximum seated flexibility with a full 20° negative tilt & 10° positive tilt
- Adjusts quickly and easily with lift and release height modification
|
NPE |
- Premium mechanism with super slim design
- Ergonomic lift and lock arm delivers complete ease of use
- Infinite tilt adjustment between -15° to 0°
- Tilt knob easily loosens and firmly locks tilt position
|
TRS7000 |
- Floats keyboard forward and down for use
- Move arm out of the way when not needed
- Intuitive, simple to raise & lower with fingertip ease
- Ideal behind counters and POS (point of sale) positions
|
IS-C |
- Palm
support is vinyl covered foam
- Tilts
a total of 30 degrees (±15°)
- The
IS-C adjusts 5.75" from (.25 above surface to 4.62"
below)
- Platform
& arm will fit all the way under20-inch deep work surfaces!
|
IS-SSW Sit to Stand |
- New: IS-SSW Sit Stand Keyboard Arm & Tray improves on IS-SS
- Keyboard arm rotates 360° at the base; made in the USA
- Choice of 11 keyboard platforms; 2 track lengths
- Adjusts 7.5" above the track & 5" below
|
IS-SS Sit Stand |
- Negative
tilt up to 20°—easily actuated with ergonomic lever
- Keyboard
is counter-balanced for effortless vertical travel
- Easy,
precise and intuitive fingertip height adjustment
- Welded
steel design assures maximum stability
|
WR-PA Sit Stand Tray |
- Over 13 inches of vertical travel & up to 20° negative tilt
- Our best sit to stand computer keyboard tray
- Effortless and intuitive height adjustment
|
Quicklift Retro Sit Stand Surface |
- Folds down compactly to a two-inch profile
- Near infinite positioning within nine-inch range
- Economical alternative to purchasing adjustable desk
- Retrofit your keyboard tray & keyboard arm into a Sit Stand
|
IS-PMRetro Sit Stand Arm |
- A ready to retrofit sit-stand arm for existing or new work surfaces
- Spring
balanced for platform/payloads of 10 to 30 pounds
- Knob
adjusted negative tilt to 15° & positive tilt to 9°
- Height
adjustment is activated by squeeze paddle
|
AKP1918: Unavailable |
- The AKP2322 is currently unavailable
|
Ergorests |
- Relieves
muscle strain and tension in neck and shoulder area
- ErgoRest
supports adjust to about 3 inches above surface
- Floats
arms & hands effortlessly about work area
- Constructed
of aluminum alloy & sturdy plastics
|
AS-24 Desk Edge Protector |
- Protects arm and wrist from sharp corners; light wrist rest
- Eliminates
the sharp corner hazard that many ergonomists cite
- Pads
are upholstered in durable vinyl on thick foam padding
- Shifts
some of the upper torso body weight to the forearms
- Can reduce
static muscle loading in lower back
|
|
Font Size
