2018 TRIPLE LCD MONITOR ARM, TOP VIEW
2018 DUAL LCD MONITOR ARM, TOP VIEW

Please note: when measuring monitors to see if the 2018 will work for you, the 19 inch and 20 inch measurements apply to the horizontal measurements of the monitor. For example, even if you have a monitor that is designated as a 21 inch monitor, this applies to its diagonal measurement, not its actual width. Chances are the width will be such that it will fit just fine on the 2018 monitor arm.

SIDE VIEW, TILTER HEAD

For minor adjustments, the tilter head has a vertical travel of 1.25 inches. This adjustment is great for those using differing LCD monitors, as the monitors can be better lined up despite mismatched positioning of the VESA plates or differences in the bezel of the screens.

SIDE VIEW, VERTICAL TRAVEL 2018-3 TRIPLE LCD MONITOR ARM

The 2018-3 Triple LCD LCD Monitor Arms have a full vertical range of 18 inches. It should be noted that if the arm is mounted to the back of a desk or table, movement will be limited because the elbow joint will meet the work surface. For full vertical movement, it is necessary to mount the arm to a wall (as illustrated), mount to a surface higher than the work surface, or use a 6 inch extension.

FRONT VIEW, 2018-2 DUAL LCD ARM

The 2018-2 Dual LCD Monitor Arm can hold two LCD monitors, each up to 19 inches in width. Please note that this is the horizontal measurement of the monitor, not the diagonal measurement that LCD monitors are typically labeled with. If you have monitors that are larger than 19 inches, consider using the 2018-3 and placing the monitors on the two outside mounts, but be aware of the weight limitations of the arm (48 pounds total maximum). The tilter heads can slide laterally across the bar so the monitor edges abut, regardless of their width.

FRONT VIEW, 2018-3 TRIPLE LCD ARM

The 2018-3 Triple LCD Monitor Arm can hold three LCD monitors, each up to 20 inches in length. Please note that this is the horizontal measurement of the monitor, not the diagonal measurement that LCD monitors are typically labeled with. If you are trying to mount just two monitors that are larger than 19 inches, consider using this LCD arm and placing the monitors on the two outside mounts, but be aware of the weight limitations of the arm (48 pounds total maximum). The tilter heads can slide laterally across the bar so the monitor edges abut, regardless of their width.