STANDARD CLAMP CONFIGURATION

This is the Standard Clamp configuration using the footplate.

CLAMP MOUNT THROUGH GROMMET HOLE CONFIGURATION

Use the Standard Clamp mount in work-surface grommet holes. The cords can run through the opening behind the mount. This SAA7000 LCD monitor arm mount will work on desks as thick as 3.75 inches.

SHALLOW TABLE EDGE CONFIGURATION

The Shallow Table Edge configuration is a variation of the Clamp Mount. It clamps to a table with a skirt as close as s 1.25 inches.

THICK SURFACE CLAMP CONFIGURATION

 The Thick Surface Clamp is another variation of the Clamp Mount and it can attach to surfaces up to 3.75 inches thick.

THROUGH-DESK CONFIGURATION

The Through-Desk Configuration for the SAA7000 mount is great for a number of applications. For example, our SAA7000 LCD arm can be mounted to desks that do not have an edge, counter tops or on console tops with the Through-Desk configuration.

Please also see the Through Desk Mount specification drawings.

REVERSE BOX EDGE MOUNT CONFIGURATION

The Reverse Box Edge Mount is equally useful for mounting the SAA7000 to most walls on a vertical plane.

Please also see the Wall Mount specification drawings.