Ergonomic keyboard trays for office, computer, CAD and light industrial applications

We think these AKP options are impossible to beat in terms of performance, cost and durability.

Make no mistake, you get an excellent US made mechanism AND premium platform for less than $200
The height adjustment of this product could not be easier, just lift with the hand and release
The IS-ER is easily adjusted between 15 degrees negative to 15 degree positive tilt
Adjusts from as low as 6" below work surface to slightly above track height
Height Adjustment accommodates over 97% of adult users at a desk height of 28.5"
If you want the positive tilt removed - we provide the option for positive tilt lockout at no additional cost
Adjustment of height anywhere within the range of 6 ¼" without the need for knobs. Simply fingertip easy
Exceeds ANSI/BIFMA X5.5, 1998 performance standards
Comes complete with hardware and easy mounting instructions.
Designed to provide whisper quiet operation
"Shorter" workers and kids need "low profile" (knee clearance) platforms; don't get a device that has lots of bulkiness beneath the tray for people under 5' 4". Chances are, they will hit their knees on the bottom of the mechanism.
Padded palm rests can help keep hands and wrists straighter to reduce unsafe & uncomfortable postures.
We suggest options that allow use of the mouse as close to the keyboard as possible. Frequent mouse users should place the mouse in a position that requires no overt reaching or stretching. We lean toward the 25974 if you have the space
Avoid Keyboard "drawers" or pull out trays that provide little, if any, height adjustability. Odds are very high that any given single height position tray is going to be an inappropriate height. Most keyboard drawers or pull-out trays don't provide any tilt capability, which is another important feature our articulating keyboard platforms provide.
Avoid flimsy, cheap products from office supply stores. Many of these products represent the absolute lowest common denominator in support solutions and turn out to be substandard. On the other hand, if you key infrequently or occasionally, then perhaps an inexpensive product is appropriate.
Easy keyboard tray height and tilt adjustments work hand in hand with a worker's ability to change seating postures to help workers achieve numerous postures. The more built in flexibility a workstation has, the greater the likelihood of reduced discomfort, reduced injuries and greater productivity.
For those who will install their own keyboard tray for the first time: All of our keyboard products operate in conjunction with a track system that attaches to the underside of the desk. Tracks are about 6" wide and can run between 17" to 23" in length depending on the model. Make sure you have the depth needed to install your chosen track. If your surface is too shallow, you will need to cut the track down with a hack saw or other metal cutting device. If your desk has a skirt, apron, support bar or obstruction underneath, you will have to build up the area where you plan to install your track to the same height as the obstruction, so that the track can be mounted level from front to back. We usually use plywood or MDF strips and attach them to the bottom of the surface. Always check the screws supplied with the keyboard tray to make sure they are short enough not to come through to the other side of your work surface. We suggest carefully pre-drilling small holes where you plan to attach your screws. If you have any questions about installation, do not hesitate to contact us at 888 420 3200.

25975	25975 19" Microsoft® Keyboard Tray - $221 Fits Microsoft® Natural™, Natural Elite™, and Natural Pro™ keyboards 1/4" phenolic and low profile mechanism provide good knee clearance Tilt and swivel mouse tray with gel pad provides infinite adjustment Adjustable mouse catcher with cord manager Mouse platform easily mounts for right- or left-handed users
25973	25973 Swivel Mouse Platform - Right/Left handed mousing - $221 1/4" Thin Phenolic and low profile mechanism provide good knee clearance Tilt & Swivel mouse with Gel pad provides infinite adjustment Gel palm rest (removable) for maximum ergonomic comfort Adjustable mouse catcher with cord manager Mouse platform easily mounts for right or left users
25718	25718 Reduce tray footprint by using keyboard clamp - $221 Sure squeeze design firmly holds keyboard in place Slides to clamp keyboards from 5" - 9" deep Mouse platform plugs in for right- or left-handed use Tilt & Swivel mouse provides infinite adjustment Gel palm rest provides maximum ergonomic comfort Adjustable mouse catcher with cord manager
25974	25974 One Piece 27" Platform - Effective Simplicity - $221 1/4" Thin Phenolic and low profile mechanism provide good knee clearance Integrated Gel Mouse pad easily switches from the right to left side Gel palm rest (removable) for maximum ergonomic comfort Mouse Manager retains mouse when platform is tilted and contains wires
26719	26719 MouseAround - $239 1/4" Thin Phenolic, low profile mechanism provide good knee clearance Features both straight and curved sliding mouse motion in one tray Mouse design smoothly slides right-to-left & forward adjustment Gel palm rest (removable) for maximum ergonomic comfort Gel mouse pad incorporates raised mouse back fence Ideal for multiple-user workstations
25977	25977 Hyper Adjustable Keyboarding System - $242.45 This arm and tray are simply hyper-adjustable Tilt & Swivel mouse platform works ABOVE and BELOW tray instantly Mouse Platform quickly & easily moves for right & left handed mousing Gel palm rest (removable) for maximum ergonomic comfort Adjustable mouse catcher with cord manager This keyboard tray is unrivaled for multi user applications
TRS20	TRS20 - $165.00 Standard 20 x 8.5 inch tray is ideal for use with keyboard only Also works with mini keyboard alongside your mouse or trackball

When you have questions, we have answers - 888 420 3200 or 214 742 6066
Cart \| Home \| Contact \| Privacy \| Terms & Conditions \| Order by Fax \| Sitemap \| Se Habla Español - Ext 219		FONT SIZE