Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
Ergomart's Pole Mount works for poles with outside diameters (OD) between 1.5 and 2 inches diameter.
This is a heavy-duty product and will stand up to the toughest environments.
Position the clamp and secure it with four socket head cap screws.
Use multiple HD Pole Mounts to create custom pole mounted workstations.
Compatible arm models: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4229, CMD2018, CMD2415, CMT2415
In the side and top view measurements that indicate depth are nominal. Since the kit is designed for mounting to multiple size pole diameters, the opening changes slightly to accommodate for those differences. Additionally included and not depicted here are the adapter bushings that allow the MKIT-E to affix to the range of pole sizes.
Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.
Yes. You will need to remove the monitor/arm for ease and safety before resetting the height.
The Mount Kit E is designed to attach to poles between 1.5" and 2" outside diameters. If your pole is within that range then this mount kit will work for you. Contact Ergomart if you have a 1 inch, 1.125 inch or 1.25" pole, we may be able to accommodate your requirement with a non standard product.
An adapter bushing is required to convert most MKITS from 1.18" receiver openings down to .75" openings suitable for devices with 3/4" diameter pins like the HE35 and the standard tilter head.