Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
Talk to an ergo expert: (888) 420-3200 or Email Us
The Dual Heavy-Duty Pole Mount works for poles with outside diameters (OD) between 1.5" and 2".
This is a dual version of the Heavy-Duty Pole Mounting Kit E.
The Dual Pole Mount allows use of most Ergomart's articulating monitor arms and other Ergomart extensions and straight mounts to attach to a single pole at the same height.
Use multiple single or dual Pole Mounts to create custom pole mounted workstations.
Compatible arm models: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4229, CMD2018, CMD2415, CMT2415
In the side and top view, measurements that indicate depth are nominal. Since the kit is designed for mounting to multiple size pole diameters, the opening changes slightly to accommodate for those differences. Additionally included and not depicted here are the adapter bushings that allow the MKIT-J to affix to the range of pole sizes.
Typically, no, our mounts are designed specifically for Ergomart products. Contact Ergomart to determine if you would like assistance.
No and Yes. Since the tilter head pin is a smaller size than the arm pin, you would not be able to do that without installing an adapter bushing into the mount. Contact Ergomart if you wish to purchase the adapter.
You will need to remove the arm and its payload before resetting the height of MKIT J
This mount will hold our articulating monitor arms and heavy duty extensions HDEXT. It will not hold a tilter head with a 3/4" pin unless you order a separate adapter bushing through an Ergomart representative.