Talk to an ergo expert: (888) 420-3200 or Email Us
Ergomart's Pole Mount works for poles with outside diameters (OD) between 1.5 and 2 inches diameter.
This is a heavy-duty product and will stand up to the toughest environments.
Position the clamp and secure it with four socket head cap screws.
Use multiple HD Pole Mounts to create custom pole mounted workstations.
Compatible arm models: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4228, SAA4229, CMD2018, CMD2415, CMT2415
In the side and top view measurements that indicate depth are nominal. Since the kit is designed for mounting to multiple size pole diameters, the opening changes slightly to accommodate for those differences. Additionally included and not depicted here are the adapter bushings that allow the MKIT-E to affix to the range of pole sizes.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.