Talk to an ergo expert: (888) 420-3200 or Email Us
This product is designed to fit Ergomart's Extended Capacity Wall Track.
It is a fixed mount component that allows freedom to expand, adapt and upgrade your workstation.
The EC track systems feature a stylish and clean look highlighted by wire management, end caps and other accessories that keep wire and cables completely hidden, managed and contained.
See our EC Track Accessory page for full details.
Compatible arm models: SAA7000, SAA2010, SAA2045, SAA179, SAA2718, SAA2415, SAA4228, SAA4229, CMD2018, CMD2415, CMT2415.
The mount also accepts SA arms and LS poles as well as the EQP3418 equipment arm.
Four 0.45 diameter bosses extend past the back plane of the MKIT-F. They protrude 0.15 inches and are understood by viewing the Side and Top Views. These four fastener points each accept a 1/4-20 thread machine screw and are tapped to a depth of 0.5 inches.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mmVESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.