Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

SAA4229KIT

Your Customization
SAA4229KIT heavy-duty monitor arm in black desk mounted in high position rear view MOUNTS! USA ASSEMBLED
SAA4229 Extra Long Monitor Arm

In stock

From $663.83

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

Usually ships in 3-7 business days.

madein

Need a mounting option not listed here? Call (888) 420-3200 or visit our

Custom Solutions page.

SAA4229 Extra Long Monitor Arm

MOUNTS! USA ASSEMBLED
Please wait while your content is loading.

REQUIRED ITEMS

THIS LONG REACH MONITOR ARM EASILY AND QUICKLY MOVES OVER A WIDE AREA

  • Effortlessly float monitors, tablets, and other equipment and devices up to 35 pounds
  • 28" vertical range when this monitor arm is mounted in positions that do not impede its travel
  • A vast array of mounting options and application solutions are available using the SAA4229
  • This heavy duty arm offers display and monitor rotation from horizontal to portrait
  • Arm reaches up to 44'' away from the mounting plane yet folds up into a 3.75" footprint
  • Tilt the display back past 90° or down to 44° and anywhere in between and adjust resistance.
  • Cable management allows raceways are attach to the outside of the unit
  • Optional 5", 8" and 12" vertical extensions add simply unmatched versatility
  • Black is our quick ship color and is ready for next day shipping in small quantities
  • The SAA4429 offers uncomprimised sit or stand comfort for a wide variety of payloads and devices
  • Choose 75mm, 100mm 100x200mm or 200mm VESA plate

No other LCD Long Monitor Arm rivals the cost-effective performance of the SAA4229 when it come to massive vertical travel, workspace-spanning lateral reach and heavy payload performance. This LCD Long Monitor Arm is ideal for almost any application in virtually every environment. If you need to float your monitor around an office, above a mixing board, or around industrial or medical equipment, this is the answer. The SAA4229 long reach monitor arm is extensively used in hospitals, dental offices, studios, and control rooms.  Never turn a knob or move a lever—simply grasp the monitor with both hands and easily move to the desired position—let go and the LCD long monitor arm stays precisely where you put it.

Shipping Weight 29 pounds
Shipping Dimensions 28" x 17" x 9"
Warranty 5 year limited

Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.

The purchasing options on this page provide a great deal of flexibility in configuring your product.  Please be aware that Mount Kit A and the 2" and 6" Vertical Extensions are not compatible with all components. You may consult the table below to determine the compatibility of various components.
 

Category Mount Kits Vertical 
Extensions
Heavy Duty 
Horizontal 
Extensions
Category Does product below
fit into product
to the right?
Mount 
Kit A
Mount 
Kit C
All Other
Mount
Kits
2"
6"
5"
8"
12"
4.5", 9.5"
and 15.5"
Monitor Arm SAA4229 - Y Y - Y Y
Vertical
Extensions
2" and 6" Y Y Y Y Y Y
   5", 8", and 12" - Y Y - Y Y
Heavy Duty
Horizontal
Extensions
4.5", 9.5", and 15.5" - Y Y - Y Y

 

Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.

 

SAA4229 - WALL MOUNTED
VERTICAL REACH

SAA4229 Extra long monitor arm specification drawing demonstrating the arm extended in high, mid and low positions with measurements

Side view of the SAA4229 when wall-mounted. With no obstructions, the arm offers 27.5" of vertical travel and has a horizontal reach of up to 44.25".

 

SAA4229 - WALL MOUNTED
DISTANCE FROM WALL

SAA4229 Extra long monitor arm specification drawing demonstrating the arm folded in high, mid and low positions with measurements

Side view of the SAA4229 when wall-mounted. In this illustration, the arm is folded so that the monitor is perpendicular to the wall. The distance from the center point of the monitor to the wall depends on the vertical position of the arm. This determines the maximum size of the monitor or tablet that can be viewed at a 90 degree angle from the wall in this folded position.

 

SAA4229 - DESK MOUNTED
HORIZONTAL REACH

SAA4229 Extra long monitor arm specification drawing top view showing the arm in fully extended and folded positions with measurements

Top view of SAA4229 when desk mounted. When fully extended, the arm reaches out as far as 44.25". When retracted in the horizontal position, the arm can be folded into as little as 3.5".

 

SAA4229 - DESK MOUNTED
MINIMUM HEIGHT

SAA4229 Extra long monitor arm specification drawing with arm desk-mounted shown with and without an extension in lowest position

Side-view of the SAA4229 when desk-mounted. The surface of the desk will inhibit the arm from traveling to its lowest possible position. As a result, the total instant vertical adjustability will be limited to 9.75" compared to 27.5" with the wall mount option. To reclaim the range of motion, optional vertical extensions can be added.

 

SAA4229 - DESK MOUNTED
MAXIMUM HEIGHT

SAA4229 Extra long monitor arm specification drawing with arm desk-mounted shown with and without an extension in highest position

Side-view of the SAA4229 when desk-mounted. The figure shows the impact of adding vertical extensions on the maximum height the arm can reach. The 12" extension (with Mount Kit C) allows the maximum height to reach 30.75".

 

SAA4229 - VERTICAL EXTENSION TABLE
MOUNT KIT C

Vertical Extension Table for the SAA4229 with Mount Kit C

Vertical Extensions have an impact on vertical adjustability in a desk mounted set up. Here are the ranges with Mount Kit C.

 

200x200mm Flat VESA Plate with Hardware
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

QTY:
$20.00
200x400mm Flat VESA Plate with Hardware
200x400mm Flat VESA Plate with Hardware

The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.

QTY:
$25.00
VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.00
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.00
Leave a Review
You're reviewing:SAA4229 Extra Long Monitor Arm
Start Rating
  • Your weight capacities for tilter heads are substantially overlapping; what do I need to know to make a decision?

    There are three basic variations of the tilter head: Standard, Spring and HD Spring. All three units share much in common. Two spring-type tilters are offered with the Long Monitor Arm SAA4229. They have the same range of motion and both use a friction resistance set screw that is tightened and loosened to accommodate the desired degree of effort the user will exert to move the monitor from one tilted angle to the next.
     
    When considering the two options, be mindful of the thickness of your monitor or device. A very thin (2" thick) LED or LCD monitor weighing 25 pounds will work just fine with the Spring Tilter with its maximum rating of 35 pounds; however, an all-in-one computer (panel PC or iMac) or Touch Screen that weighs 25 pounds and is 5" thick would probably create too much leverage and would be a better match for the higher rated HD Spring Tilter. If you anticipate constant use of the tilt function and want smooth ease of use with a heavier monitor, you should opt for the HD Spring Tilter. Likewise, payloads that are effectively "thicker" create added leverage.
     
    Generally speaking, a user who wants complete ease of use when adjusting the tilt of a 30 pound iMac or a similar weight "all-in-one" computer should select the HD Spring Tilter.
     
    Call for further information and recommendations: 888 420 3200.

Please wait while your content is loading.