Talk to an ergo expert: (888) 420-3200 or Email Us
The EQP3418 Computer Equipment Arm floats computer equipment up to 52 pounds AND accommodates your keyboard PLUS it has an optional 26" tray for keyboard and mouse. Once you install this arm, you'll never twist a knob or push a lever; simply grasp the stainless steel handle and float the entire device effortlessly from one position to the next. The EQP3418 Equipment Arm is ideal for most any application in virtually every environment. This is hyper-flexible and truly ergonomic equipment arm. This articulating equipment arm is suitable for the most demanding use. Get the arm support you need!
Don't see the mounting option you need? Please call 888 420 3200 or 214 742 6066.
Quick ship is available for 32 to 52 weight range in the standard and large platforms. Orders received before 12 noon CST normally ship within 24 hours. Quick ship orders received by 12:00 noon CST normally ship the same day, but to guarantee same-day shipping, you must call Ergomart (888-420-3200) to verify availability of product.
The purchasing options on this page provide a great deal of flexibility in configuring your product. Please be aware that Mount Kit A and the 2" and 6" Vertical Extensions are not compatible with all components.
|Shipping Weight||26 pounds|
|Shipping Dimensions||27" x 19" x 9"|
|Warranty||3 year limited|
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
The CRT platform in the lowest position. The CRT platform and keyboard tray are roughly 9 inches below the mounting plane created by the junction of the mount and arm pin. The handle of the retractable equipment tray can be used as a keyboard holder or simply as a handle to maneuver the platform.
The CRT platform and keyboard tray are roughly 9 inches above the mounting plane created by the junction of the mount and arm pin.
This image illustrates the height of the CRT when attached using a through desk or clamp mount. This image shows a theoretical lowest height arm would normally stop at the height of the surface, unless mounted at the edge of the mounting platform.
The height of the equipment platform can be up to 14.5 inches above the work surface, considerable distance even without the optional Vertical Extensions. Note that the keyboard tray support can be extended as much as 12 inches and used as a keyboard platform or as a handle for the tray.
This image illustrates the height of the EQP3418 when using a desk mount with the optional 5 inch Vertical Extension. Even with the 5 inch extension it is still possible to bring the EQP3418 all the way down to the working surface.
With a 5 inch Vertical Extension it is possible to have the platform surface over 19 inches above the work surface.
With an 8 inch Vertical Extension the EQP3418 can be lowered to just above the work surface, leaving a 1.5 inch gap between the bottom of the mounting plate and the surface.
With an 8 inch Vertical Extension it is possible to have the platform over 22 inches above the work surface.
With a 12 inch Vertical Extension there is at least 5 inches of clearance between the work surface and the bottom of the mounting plate.
With a 12 inch Vertical Extension it is possible to have the platform almost 27 inches above the work surface.
In the horizontal, (and most extended position) the EQP3418 Computer Monitor Arm shows off its substantial forward reach.