Yes, our tilter head allows for a full 360 degree turn as long as you have the space to do so.
Talk to an ergo expert: (888) 420-3200 or Email Us
This handsome mechanism is designed to handle LED and LCD monitors as well as iMacs® and Cinema Displays® and various monitors used in film and video production. Both versions (A22 and A23) allow for quick hand adjustment of tilt and left/right swivel (panning). The durable cast aluminum and steel mechanism also delivers easy and instantaneous rotation from landscape to portrait. Useful for studio and location work. The robust tilter mechanism allows the user to tilt the monitor down as much as 45 degrees (or until the screen is stopped by the pole). The tilter can be adjusted up from vertical over 90 degrees to a position parallel to the ceiling!
Shipping Weight | A000022 C-Stand Adapter: 4 pounds A000023 C-Stand Adapter: 5 pounds |
Shipping Dimensions | 9 x 5 x 5 inches |
Warranty | 3 Year limited / 2 Years in Commercial Rental Applications |
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
Yes, our tilter head allows for a full 360 degree turn as long as you have the space to do so.
It is very rugged and is used in location production by film and video equipment rental companies in the USA extensively.
This application is possible but not advised for safety reasons. A safety chain and replacement fastener would be required to safely attach the unit upside down. Contact Ergomart for assistance.
Yes. To substantially enhance security a specialty replacement set screw would need to be at least 3/4 inches long with 5/16-18 threads.