Name: Dual Bracket for Mid-Size (23" wide) Monitors
Brand: Ergomart
SKU: ADJ1523

SKU

ADJ1523

Enables Cost-Effective Height Adjustable Dual Monitor Workstations

Mounts two small to medium size monitors on arm or stand
Can be mounted on our monitor/keyboard combo arms
Accommodates monitors up to 23" in width
When selecting the appropriate arm, consider the combined weight of the monitors and the 5-pound bracket

The ADJ1523 Dual Monitor Bracket is recommended for monitors measuring up to 23 inches in width. Please remember that in this instance the monitor must be measured from outside edge to outside edge (not diagonally). The bracket supports 75 or 100 mm VESA adapters. The bracket itself weighs about 5 pounds. Remember to account for the combined weight of this bracket and both monitors when figuring weight ranges and load limits for the arm.

Shipping Weight	12 lb
Shipping Dimensions	23" x 14" x 4"
Warranty	5 Year limited

Drawings

ADJ1523 - FRONT VIEW

ADJ1523 dual monitor bracket specification drawing front view with measurements

Front view of the EGT ADJ 1523 showing the dual 24" wide dual bracket. The central portion of the bracket has the 1.9" tilter head and 75 mm by 75 mm VESA hole patterns. The two centrally located holes are vertically spaced 2" apart and are intended for mounting the bracket to a combo monitor/keyboard arm. The horizontal slots are 5.5" long accommodating monitors up to approximately 23" wide.

ADJ1523 - TOP VIEW

ADJ1523 dual monitor bracket specification drawing top view with measurements

The bracket slopes forward starting three inches from the center at 3.13° on each side putting each end on a plane .67" in front of the center mounting area, as illustrated in the drawing.

ADJ1523 - 75 X 75 MM SLIDING VESA PLATE

Specification drawing with measurements for 75 x 75mm VESA plate for ADJ1523 dual monitor bracket

ADJ1523 - 100 X 100 MM SLIDING VESA PLATE

Specification drawing with measurements for 100 x 100mm VESA plate for ADJ1523 dual monitor bracket

Sliding VESA brackets can be positioned anywhere along each slot.

Download

Dual Monitor Bracket for Mid-Size (23”-wide) Monitors Installation Instructions

FAQs

Can I mount two monitors of different sizes?

Yes and No. There are multiple issues to check before ordering: You can definitely place two monitors of different sizes on a dual monitor bracket. The issue is usually vertical alignment. If you want both monitors centered in relation to one another, then make sure both monitors have VESA hole patterns that are either perfectly centered or happen to be off-center by a similar ratio. To understand how they will actually align, carefully place both monitors face down (stands removed) and find the vertical centers of those monitors and determine if the VESA mounts are centered on the back of both units. Some users will want to align monitors along the bottom. This is an even trickier proposition. It will be sheer luck if you find two different size monitors with VESA hole patterns on the back that actually meet your desire for bottom allignment. Again, lay the monitors face down to understand how they will align. Please also see the FAQ relating to differing monitor weights.
Can I mount two monitors of different weights?

Monitors of differing wieghts can be placed on our dual bracket as long as the difference in weight is not too great. It is best to speak with technical support at Ergomart and let us help determine the appropriateness of monitors that are greater than 4 pounds different in wieght. The heavier monitor may need to be placed closer to the center to align the center of gravity with the center of the dual bracket.
Can I mount two monitors with different VESA hole patterns?

Yes but you will need to determine if the alignment of the two will be acceptable. To understand how they will actually align, carefully place both monitors face down (stands removed) and find the vertical centers of those monitors and you can see how they align since the center of the VESA hole patterns will be on the same horizontal plane. Please also see the FAQ relating to differing monitor weights.
What are the benefits of this over the Connect dual monitor set-up?

One benefit is that the dual bracket is easily added to an existing arm, providing instant height adjustment and horizontal reach to both monitors at a relatively low cost. on the other hand, the Connect-2 does have a motorized height adjustment option and provides independent tilt, swivel, rotation capability for the two monitors.
Do the monitors have individual tilt when mounted on the Dual Bracket?

The monitors will not tilt individually, they will tilt as one.
When mounted on a BB103, will the monitors shake when I type?

All BB103 monitor keyboard arms are subject to some degree of movement and rebound when keying. Adding the ADJ1523 dual bracket will not increase the movement or shakiness of the overall solution. The added weight of the additional monitor and bracket will actually increase the "inertia" present within the entire assembly. A heavy body at rest is more difficult to move than a lighter body.
Will I be able to tilt my monitors up and down?

Yes, both monitors can be tilted up and down simultaneously when the dual bracket is attached to a tilter mechanism. Usually the total payload (monitors and dual bracket) will be heavy enough to require the use of an HD Tilter head (TILTER-HDS).