Talk to an ergo expert: (888) 420-3200 or Email Us
Increase productivity and relieve the discomfort and ill-effects of sitting for long periods of time with the Dorian sit-to-stand workstation. Quickly adjust the height of the desktop computing station with the press of a button. Just over 17 inches of height adjustability provides sit-to-stand capabilities for users up to 6' 5" tall.
The ample work surface provides room for not only your keyboard and mouse, but other small essentials, keeping them within easy reach even when the Dorian is moved to a higher position. To change the height, the user simply needs to press a button on the edge of the worksurface and lift or lower the device. A motion assist mechanism inside the main column helps to create smooth and easy vertical movement. The workstation will lock in place once the button has been released. The Dorian's design not only keeps the unit steadfastly in place once positioned, it is constructed to minimize movement created by heavy-handed keyboarding. A mini tray is located beneath the monitor to hold small items such as pens, smartphones and keys.
While the relative height of the monitors' positions above the work surface is set at assembly time, it can be changed in under two minutes if later required. Once the device setup is completed, the monitors and work surface will move up and down in tandem. Each monitor can independently tilt up and down, swivel left to right and rotate from landscape to portrait. The two monitors on the outside are placed on extension beams which can be angled to create an arc-like configuration using the hinges that connect the extensions to the central beam.
The Dorian typically sits on top of a desk using a large, heavy base which keeps the device stable. Pads beneath the base facilitate movement on top of the desk for better positioning. Clamp and through-desk mounting is also available.
The total weight capacity of the Dorian Triple is between 15-36 pounds. This is the total of all the monitors to be mounted and the items on the work surface, which will vary depending on the user.
Questions? Please call us at 888 420 3200.
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
The Dorian's vertical position can easily be adjusted by pressing the button located on the bottom right of the worksurface. While pressed, the device can be lifted or lowered. When released, the unit will remain firmly in position.
The mini tray provides a convenient location to store smaller items such as keys, phones and writing utensils. It is located directly beneath the monitors on the work surface.
The horizontal beam can be positioned at any height along the column for ideal positioning relative to the work surface.
Each individual monitor is attached to the horizontal beams via a VESA compatible tilter mechanism. These tilters can be placed anywhere along the beam to accommodate various monitor sizes. Each tilter head can independently swivel left to right, tilt up and down and rotate the monitor from portrait to landscape.
Cable management clips located along each side of the main vertical column keep cables in check and organized, routing them together down each side of the device.
The caps at each end of the horizontal beam give the Dorian a finished look. But they are not merely intended for aesthetic purposes. They also act as a container for all the tools needed to install and adjust the Dorian sit-stand workstation.
Conveniently stowed away in the end cap are the 1/8" and 7/32" Allen Wrenches used in the installation and adjustment of the Dorian.
Additional cable guides are positioned on the channel on the back surface of the horizontal beam. It all adds up to a simple, flexible system that eliminates cable clutter.
|Shipping Weight||Box 1: 32 lbs | Box 2: 56 lbs | Box 3: 18 lbs|
|Shipping Dimensions||Box 1: 28" x 26" x 3" | Box 2: 35" x 33" x 7" | Box 3: 40" x 14" x 6"|
|Warranty||5 Year limited|
Each monitor can be adjusted with individual left and right swivel for precise positioning.
The Dorian vertically adjusts just over 17", providing a sit-to-stand experience for most users.
Each monitor independently tilts 45° down and 90° upwards from vertical to allow for easy viewing positioning whether sitting or standing.
PORTRAIT & LANDSCAPE
Each monitor is easily changed from landscape to portrait.
The monitor attachments can be positioned anywhere along the horizontal beams, allowing for a variety of monitor sizes.
The Dorian Triple features a 30" central beam and two 10" extension beams; one on each side. The extensions are attached to the central beam via two articulating hinges that allow the monitors to be placed in an arc-like orientation if desired.
With the horizontal beam attached to the vertical column at 4.5", its lowest practical position, the beam can adjust from 6" to 23" above the desk surface.
When the monitor mounting beam is attached to the main column at its highest point, the monitors can adjust from 28" to 45" above the desk.
The Dorian's 30" large work surface provides plenty of room for a keyboard, mouse and other office supplies.
The Dorian Triple has outer beams that can be angled in for a curved viewing experience. In this case, the maximum allowable width for the monitors is slightly diminished from when they are flat. At a 20 degree angle, the maximum width can be around 24 inches, assuming the monitors are two inches deep.
Many gamers and programmers can benefit greatly by integrating the Dorian Triple. Where users choose to have their monitors in a flat configuration each monitor’s maximum width will be approximately 27 inches wide.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.