Yes. Both monitors will be able to independently swing.
Talk to an ergo expert: (888) 420-3200 or Email Us
This Dual LCD monitor mount is designed for mounting two larger LCD monitors side by side on a floor or ceiling mounted pole system. The triple articulating arm arrangement allows monitors to be adjusted left to right and back and forth. For additional easy movement, each monitor is mounted to a center tilter head which allows for full tilt and 360° rotation. Further, the tilter head components allow for quick adjustment from landscape to portrait for both monitors. This heavy-duty mounting system is perfect for most 19" – 37" flat panel monitors and is commonly purchased with Ergomart's 192 Offset Pole Stand, and our 192 Flange Pole Mount.
Optional VESA Sizes to Handle Larger or Heavier Monitors: The Adjustable MSU4X6 can fit any VESA hole pattern between 100mm (height) x 300mm (width) and 400mm (height) x 600mm (width). Please consult our VESA reference page for the compatible VESA sizes for the heavy duty MSU4X6 chart, the adjustable MSU4X6 specification drawing and notes regarding supported weights.
|Shipping Weight||16 pounds|
|Shipping Dimensions||17" x 14" x 9"|
|Warranty||5 year limited|
Both screens can rotate 360° on the tilter head allowing instantaneous switching from portrait to landscape and back. The angles of the arms can be adjusted to ensure the monitors are next to each other.
The monitors can be rotated horizontally while maintaining the side-side configuration as shown here.
MONITOR ARM SWING
The articulated arms that allow the monitors to be positioned next to each other have a significant range of lateral motion giving the PM44 greater adjustability than the primary side-by-side application. Some configurations with arms fully extended are to be used with a Flange Base that is bolted to the floor for increased stability.
Each monitor can be adjusted 90° upward and almost 45° downward with respect to the vertical orientation, allowing the user to select the most comfortable viewing angle.
The Dual LCD pole Mount shown with two SA0950s from the top view. Depending on the size of the mounted monitors the overall reach will change. This illustration shows positioning for monitors that are only 21" wide. The the maximum forward reach is substantial at 15 inches. As the width of the monitors is increased the reach from the pole decreases.
Adjust the SA0950s in the widest position to achieve maximum distance between the tilter heads. This position can support monitors as wide as 30.5". As illustrated, the widest monitors will place the monitors 3 inches from the pole center. The three articulating points of each arm allows a wide range of larger monitor sizes to be positioned side by side.
The Dual LCD pole Mount shown with two SA1288s from the top view. Depending on the size of the mounted monitors the overall reach will change. This illustration shows positioning for monitors that are 23" wide and the maximum forward reach they will have. The three articulating points of each arm allows a wide range of larger monitor sizes to be positioned side by side.
Adjust the SA1288s in the widest position to achieve maximum distance between the tilter heads. This position can support monitors as large as 37". The three articulating points of each arm allows a wide range of larger monitor sizes to be positioned side by side.
PM44 dual monitor pole mount specification drawi showing isometric view and front view with measurements.
PM44 dual monitor pole mount specification drawings showing top and side views of the yoke that accepts the monitor tilter heads or the extension arms. The images depict the overall the overall length at a nominal 6.5" and a height of 2.5 inches
MSU 400x600 Large VESA Adapter Bracket weighs 9 pounds and thereby reduces the weight capacity of the Dual Pole Mount by 9 pounds. For example, if an arm assembly has a stated weight capacity of 35 pounds, when using the MSU4X6 VESA Adapter Bracket it is reduced to 26 pounds.
The MSU 400x600 VESA plate is used to accommodate very large monitors, here it is shown in its widest (black) and narrowest (gray) configurations.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Yes. Both monitors will be able to independently swing.
Yes. Contact Ergomart for assistance with your order.
No they don't, however they, in total, do need to be in the weight range for the tilter head you choose.
No. This is only the mount for the pole. The pole and base are sold separately with different heights and options for the base.
No, the set screw deforms the original bushing into a slot on the adapter bushing, making it difficult to extract. Even if one is able to remove adapter, the original bushing is often times deformed and will not easily accept the 1.18" diameter arm pin.