Yes. Both monitors will be able to independently swing.
Talk to an ergo expert: (888) 420-3200 or Email Us
This Dual LCD monitor mount is designed for mounting two larger LCD monitors side by side on a floor or ceiling mounted pole system. The triple articulating arm arrangement allows monitors to be adjusted left to right and back and forth. For additional easy movement, each monitor is mounted to a center tilter head which allows for full tilt and 360° rotation. Further, the tilter head components allow for quick adjustment from landscape to portrait for both monitors. This heavy-duty mounting system is perfect for most 19" – 37" flat panel monitors and is commonly purchased with Ergomart's PM192 Offset Pole Stand, and our PM192 Flange Pole Mount.
Optional VESA Sizes to Handle Larger or Heavier Monitors: The Adjustable MSU4X6 can fit any VESA hole pattern between 100mm (height) x 300mm (width) and 400mm (height) x 600mm (width). Please consult our VESA reference page for the compatible VESA sizes for the heavy duty MSU4X6 chart, the adjustable MSU4X6 specification drawing and notes regarding supported weights.
Shipping Weight | 16 pounds |
Shipping Dimensions | 17" x 14" x 9" |
Warranty | 5 year limited |
Black is our Quick Ship (QS) color. Please call us about custom colors with four to six week lead times. Orders are usually shipped within 48 hours. Questions? We are here to help you! Please call 888 420 3200 or 214 742 6066.
|
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Yes. Both monitors will be able to independently swing.
Yes. Contact Ergomart for assistance with your order.
No they don't, however they, in total, do need to be in the weight range for the tilter head you choose.
No. This is only the mount for the pole. The pole and base are sold separately with different heights and options for the base.
No, the set screw deforms the original bushing into a slot on the adapter bushing, making it difficult to extract. Even if one is able to remove adapter, the original bushing is often times deformed and will not easily accept the 1.18" diameter arm pin.