Talk to an ergo expert: (888) 420-3200 or Email Us
This POS countertop LCD / touch screen / capture device works in a wide variety of applications in retail environments from restaurants to kiosks. Its slim design and wire management capabilities keep things looking uncluttered while its sturdy construction handles every day point of sale use.
Height adjustment on this POS stand is easy—simply twist the integrated knob, move the pole to the desired height, and twist the knob again to lock into place. Keep your LCD monitor, touch screen, credit card machine, or other retail device safe—tip-over risk is eliminated and theft is deterred since the mount fastens securely to the countertop or other horizontal surface. Cables, cords, and wires stay out of view and the customer's way. Wires enter the mount and then either pass through a hole in the surface or exit behind the mount. This point of sale LCD stand will quickly pay for itself in glare prone work environments. Employees and customers who can see their transaction information better will speed the process along and thus increase productivity.
|Shipping Weight||11" - 15": 7 pounds|
|15" - 23": 8 pounds|
|Shipping Dimensions||11" - 15": 16" x 11" x 5"|
|15" - 23": 16" x 11" x 5"|
|Warranty||3 year limited|
The POS4 point of sale display stand is available in three height ranges as illustrated: 11 to 15 inches, 15 to 23 inches, 23 to 39 inches. The base is shown at 4" at its widest point with a 2.25" square hole pattern for mounting. The VESA monitor Bracket at the top fixes the monitors at 30 degree tilt increments from the next. The most typical angles are 90 (perpendicular to the floor) 60 and 30 degrees.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mmVESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.