Talk to an ergo expert: (888) 420-3200 or Email Us



Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE


POS5 Through-Counter PoS Monitor Mount



  • Height adjustable, through-counter POS mount
  • Sturdy build for constant retail/touchscreen use
  • For devices weighing up to 20 lb
  • For 75 x 75 and 100 x 100 mm VESA devices
  • Tube passes through 1 13/16" grommet hole
  • Cables go through the counter inside the tube
  • Not meant for frequent re-adjustment (wrench needed)
  • Tilt angle can be unlocked (240°) or locked (30° steps)
  • Three models with varying adjustability:
  • POS512 (7-12"), POS524 (7-24"), POS536 (7-36")


  • Tube passes through counter in 1 13/16" minimum grommet hole
  • Just attach your device & adjust to fit your point of sale needs
  • This POS equipment stand is designed for single height settings
  • Cables travel down inside the mount and through the counter
  • Locked tilt mode allows settings in 30° increments over 240°
  • Use as an unlocked tilting head with 240° of unimpeded tilt
  • POS stand height may be adjusted with an Allen wrench
  • 7 to 12 inches of vertical adjustability with the POS 512
  • 7 to 24 inches of vertical adjustability with the POS 524
  • 7 to 36 inches of vertical adjustability with the POS 536
  • Perfect for hands-on equipment such as touch screens weighing up to 20 lb
  • Sturdy construction stands up to constant retail use
  • Non VESA mounting requirements? Call or email us
  • VESA compliant mounting of 75 and 100 mm

This POS through countertop mount will fit perfectly in almost every retail environment. Its slim design and wire management capabilities keep things looking uncluttered while its sturdy construction handles every day point of sale use. The real advantage of this device is the excellent height settings offered by the POS 524 and POS 536. Ergomart's POS5 stands are of the highest quality and aesthetics. These good looks make the POS5 series suitable for upscale retailers yet tough enough to withstand the rigors of fast-paced supermarket environments.

Cables, cords, and wires stay out of view and out of the customer's way. Cords and wires enter the mount and pass through the counter. Height adjustment is easy—simply twist a set screw in the base, move the pole to the desired height, and tighten it back again to set. Keep your LCD monitor, touch screen, credit card machine, or other retail device safe—tip-over risk is eliminated and theft is deterred since the mount fastens securely to the table or countertop.

Shipping Weight 9 pounds
Shipping Dimensions 38" x 11" x 5"
Warranty 3 year limited

Mount Type

Monitor Stand

Number of Monitors



Countertop Installed

Weight Range

Up to 20 lb

Monitor Horizontal Reach


Vertical Adjustment

Readjustable 7"-12", 7"-24", or 7"-36"

VESA Options

75 x 75
100 x 100

Portrait to Landscape


Max Swivel (at Monitor)


Monitor Tilt Range

240° total


POS5 Specification drawings of three height adjustable through surface mount versions and image of lockable tilt mechanism and bottom base view

The POS5 point of sale display stand is shown in its three standard pole lengths.  The unique surface penetrating design comes in a 7 to 12 inch range, a 7 to 24 inch range and a 7 to 36 inch range.  All mounts feature a 4 inch round footprint with a 2.25 inch square attachment pattern. The VESA monitor bracket at the top fixes the monitors at 30 degree tilt increments from the next.  The most typical angles are 90 (perpendicular to the floor) 60 and 30 degrees



100x200mm Flat VESA Plate with Hardware
100x200mm Flat VESA Plate with Hardware


The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.

200x200mm Flat VESA Plate with Hardware
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

200x400mm Flat VESA Plate with Hardware
200x400mm Flat VESA Plate with Hardware

The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.

Heavy-Duty Mount Adapter Plate 100x300 to 400x600mm
Heavy-Duty Mount Adapter Plate 100x300 to 400x600mm

The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

Leave a Review
You're reviewing:POS5 Through-Counter PoS Monitor Mount
Start Rating
  • I need something tough for all day use. Is this product sound and secure?

    This product is specifically designed and manufactured for commercial and industrial applications.

Please wait while your content is loading.