Talk to an ergo expert: (888) 420-3200 or Email Us
The CONNECT-3 is a heavy-duty stand designed for installing and managing three monitors weighing as much as 30 pounds each. Three identical monitors measuring 27 inches in width can be placed side by side. The monitors are attached to articulating mounts which readily tilt forward and back, swivel side to side, and rotate from portrait to landscape. These mounts are designed to be positioned anywhere along the three beams. The central beam is 30 inches wide. The two lateral beams are connected to the central beam with articulating hinges and can be angled to create an arc set-up. The wire management is simple and elegant and ensures clutter-free cable routing. Clamp or thru-desk mount options are available.
The great deal of modularity inherent in the CONNECT family of stands allow you to expand a solution over time or create custom set ups. For example, a second tier of one, two, or three monitors can be added at a later time. All of this with maximal reuse of the original components.
Motorized Height Adjustment
The CONNECT-3 monitor stand has an option for a height adjustable, motorized column which provides up to 10 inches of simultaneous vertical adjustment for all three monitors. This feature facilitates fine tuning of complex installations and is often preferred in situations where multiple users work at the same station.
|Connect-3 Shipping Weights and Dimensions|
|Static Column||32 lb, 41"x15"x15"|
|Motorized Column||box1: 15 lb, 27"x9"x4", box2: 29 lb, 32"x18"x12"|
|Clamp Mount||adds 7 lb to box1|
There are three horizontal beams, each intended to hold one monitor. The center beam measures 30 inches. The outer beams are 10 inches long and and are connected to the central beam with hinge mechanisms, allowing monitors to be placed in a curved configuration.
Static columns are used to mount the horizontal beams. The central beam is affixed to the column during installation at any point along the vertical column. The single static column is 17 inches in height.
The motorized column is an optional feature. It enables up to 10 inches of simultaneous height adjustment for both monitors when the button located at the base is pressed.
With the beams alignment straight, the CONNECT-3 can accommodate three identical monitors each measuring up to 27 inches wide in a landscape orientation.
When using three monitors users can choose to have their CONNECT-3 monitors in a colinear/flat configuration or angled. When the monitors are colinear their maximum width can be approximately 27 inches.
When a curved or enveloping configuration effect is desired it is accomplished by rotating either the tilter mechanisms behind the monitor and/or the hinge points between the beams. In the instance where the outer beams of the CONNECT-3 are pivoted inwards 20 degrees with a two-inch monitor depth, the maximum width is of each display is approximately 24 inches.
The side view of the single tier configuration with the clamp mount assembly and the tilter mechanism shows the depth of the VESA mounting plane in relation to other points. 8.5 inches notation specifically refers to the distance between the back edge of a work surface abutting the back of the clamp and mounting point of the monitor.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.