Static columns are meant to be set to the desired height of use and left there.
Talk to an ergo expert: (888) 420-3200 or Email Us
The CONNECT-3 is a heavy-duty stand designed for installing and managing three monitors weighing as much as 30 pounds each. Three identical monitors measuring 27 inches in width can be placed side by side. The monitors are attached to articulating mounts which readily tilt forward and back, swivel side to side, and rotate from portrait to landscape. These mounts are designed to be positioned anywhere along the three beams. The central beam is 30 inches wide. The two lateral beams are connected to the central beam with articulating hinges and can be angled to create an arc set-up. The wire management is simple and elegant and ensures clutter-free cable routing. Clamp or thru-desk mount options are available.
The great deal of modularity inherent in the CONNECT family of stands allow you to expand a solution over time or create custom set ups. For example, a second tier of one, two, or three monitors can be added at a later time. All of this with maximal reuse of the original components.
Connect-3 Shipping Weights and Dimensions | |
Static Column | 32 lb, 41"x15"x15" |
Clamp Mount | 7 lb |
|
V12
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
Static columns are meant to be set to the desired height of use and left there.
Yes, each monitor is on a separate tilter mechanism that allows portrait and landscape mode.