No they don't, however they do need to be in the weight range for the tilter head you choose.
Talk to an ergo expert: (888) 420-3200 or Email Us
This Dual LCD monitor mount is designed for mounting two larger LCD monitors back to back on a floor or ceiling mounted pole system. Each monitor is mounted to a tilter head allowing for full tilt and 360° rotation with ease. The tilter heads also enable independent instant landscape to portrait adjustment for the two monitors. Optional extensions can add up to 10 inches of reach and two more articulation points to each side of the mount. This heavy-duty mount ideally suited for most flat panel monitors and compatible with Ergomart's PM192 Pole Systems, and in particular the PM192 Center Pole Stand and the PM192 Flange Pole Mount.
Optional Extensions Increase Reach of the PM42 LCD Pole Mount: The 3.5 inch extension has a final weight capacity of 39 lb; the 7 inch extension will handle 35 lb; 10.5 inch extension (3.5 + 7 inch) will handle 30 lb payloads.
Our monitor pole mounts can handle larger monitor sizes with the Adjustable MSU4X6 VESA adapter, which can fit any VESA hole pattern between 100mm (height) x 300mm (width) and 400mm (height) x 600mm (width). Note that the MSU4x6 is only recommended with the heavy duty spring tilter head and without any horizontal extensions. The weight of the MSU4x6 is 9 pounds and must be added to that of the monitor to determine the suitability of the mounting solution.
Shipping Weight | 12 pounds |
23 pounds (with one MSU4x6 VESA adapter) | |
32 pounds (with two MSU4x6 VESA adapters) | |
Shipping Dimensions | 10" x 8" x 6" |
27" x 16" x 9" (with one MSU4x6 VESA adapter) | |
30" x 30" x 6" (with two MSU4x6 VESA adapters) | |
Warranty | 3 year limited |
Black is our Quick Ship (QS) color. Please call us about custom colors with four to six week lead times. Orders are usually shipped within 48 hours. Questions? We are here to help you! Please call 888 420 3200 or 214 742 6066.
|
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
No they don't, however they do need to be in the weight range for the tilter head you choose.
No, the set screw deforms the original bushing into a slot on the adapter bushing, making it difficult to extract. Even if one is able to remove said bushing, the original bushing is often times deformed.
This is only the mount for the pole. The pole and base are sold separately with different heights and options for the base.