Talk to an ergo expert: (888) 420-3200 or Email Us
Without the need for furniture or wall space, you can create a multi-monitor system practically anywhere, including educational and medical environments, stores and lobbies and much more. The PM64 utilises the versatile CONNECT monitor mount, a heavy-duty set of 3 hinge-connected beams that accommodate four monitors. Adding a second set of beams creates an impressive eight-monitor mount. The PM64 monitor mount system was created to be used with Ergomart's Series 192 pole floor stands, which are available in five standard lengths but can be customized if required.
The four monitors are mounted on three heavy-duty beams. The middle beam measures 30" and holds two monitor tilter attachments. The two hinged side beams are 20" in length and mount one monitor each. Each monitor mount can be placed anywhere along their associated beam, allowing for any monitor size to sit flush with the other mounted screens. If equally sized, the maximum monitor width is 24.67" in flat configuration. The hinged side beams can be tilted inwards to create a curved formation, but this reduces the maximum monitor size as the bezels will interfere on larger monitors. If tilted to 20 degrees, the maximum screen width is approximately 22". For fine adjustment, each monitor can individually be tilted, swiveled and rotated.
An eight monitor mount system can be created by adding another row of beams. These beams can be attached anywhere to the mounting pole, making it simple to accommodate any monitor height.
The PM64 is designed to be used in conjunction with Ergomart's Series 192 pole floor stands. They are available in three options - the flange pole floor stand, which is bolted with six fasteners to the floor and two moveable options, the offset pole floor stand and center pole floor stand. However, if the pole is stable and can support the mounted weight, any pole can be used with an outside diameter of 1.5" - 2".
|Shipping Weight||22 pounds|
|Shipping Dimensions||32" x 15" x 8"|
|Warranty||5 year limited|
If a flat/colinear configuration is desired for the PM64, each monitor’s maximum width can be approximately 24.67 inches wide.
The PM64 has outer beams that can be angled in for a curved viewing experience. In this case, the maximum allowable width for the monitors is reduced when compared to a flat arrangement. At a 20 degree angle, the maximum width will be around 22 inches, assuming the monitors are two inches deep.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.