Talk to an ergo expert: (888) 420-3200 or Email Us
The PM40-BB103 perfect flat screen pole mount for dental offices, laboratories, kiosks and retail environments—anyplace you need to mount a monitor and keyboard user friendly adjustability coupled with a minimal footprint. The unit is easily quickly tilted and turned, allowing for easy repositioning and instant access to short and tall users alike. Ergomart's Pole Mount works for poles with outside diameters (OD) between 1.5 and 2 inches. This is a heavy-duty product and will stand up to abuse in the toughest environments. Tilt and swivel resistance are easily adjusted for quick and easy movement or may be set for greater resistance to movement for consistent with the requirements of use with Touch Screens.
|Shipping Weight||12 pounds|
|Shipping Dimensions||26" x 20" x 6"|
|Warranty||5 year limited|
A component view of the mounting interface for the PM40-BB103 that allows it to attach to Ergomart series 192 poles as well as most 1.5 to 2 inch outside diameter poles in a vertical orientation. It accepts the .75 pin that protrudes down from the tilter mechanism.
PM40-BB103 monitor and keyboard pole mount pole attachment component front view with measurements.
PM40-BB103 monitor and keyboard pole mount vertical pole attachment component side view with measurements. The 4.75 inch measurement is nominal as this attachment component changes slightly to fit different OD poles.
PM40-BB103 monitor and keyboard pole attachment component from top view with measurements.
PM40-BB103 monitor and keyboard pole mount specification in perspective view.
PM40-BB103 monitor and keyboard pole mount specification front view shows various measurements including an overall height of 15 inches and maximum width of 26 inches.
PM40-BB103 monitor and keyboard pole mount side view illustrates that the asembly folds cleanly into 8.5 inches of space from the front of the pole to which it is attached.
PM40-BB103 monitor and keyboard pole mount specification top view with various measurements. The overall depth of the tray when folded open and horizontal is 18.25 inches from pole center to tray front.
PM40-BB103 monitor and keyboard pole mount specification side view with measurements. A key measurement is the 13.25 inch distance from tray front to the VESA bracket plane.
PM40-BB103 monitor and keyboard pole mount specification side view extended with 3.5-inch extension with multiple measurements. Reach of the open tray front to the front of the pole is 21.25 inches.
PM40-BB103 monitor and keyboard pole mount specification side view extended with 7-inch extension showing multiple measurements. Reach of the open tray front to the front of the pole is 24.75 inches.
PM40-BB103 monitor and keyboard pole mount specification side view extended with 3.5-inch and 7-inch extensions with multiple measurements. Reach of the open tray front to the front of the pole is 27.75 inches.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mmVESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.