Turn the ordinary into the extraordinary. Retrofit any existing desk or table to create an ergonomic, electric-powered sit-to-stand workstation. Immaculately designed with clean lines and modern edges, the Winston-E will be appreciated for both its form and function. The device is stable while in use, supported by a wide base platform. Height can be adjusted with the touch of a button near the rear of the keyboard platform over 18" of vertical travel. Save a preferred height so the device can be instantly returned to the same height with one button press.
The distance between the monitors and worksurface platform can also be adjusted for a maximum monitor height of 37". Each monitor's tilt and focal depth can be adjusted independently for ideal ergonomic positioning no matter what the workstation's height. The Winston-E holds up to 40 pounds in weight, including the monitors and anything placed on the worksurface, which is typically around 1-2 pounds. In this case, each monitor may weigh up to 19 lb. The workstation accommodates widescreen monitors up to 30".
The Winston-E comes with two platform options. The standard is 22" deep x 30" wide. The smaller 16" x 30" platform easily fits in smaller desk areas but still has ample space for a keyboard, mouse and the storage tray. The storage tray is located at the rear of both platforms and keeps safe smaller items such as pens, phones and keys. The buttons to control the device are located at the front of this storage tray. Cables are kept under control with clips located on either side of the stand.
The Winston-E sit-stand workstation is also available in Winston-E Single and Winston-E Triple monitor setups. Ergomart's Dorian Single, Dorian Dual, Dorian Triple and Dorian Quad monitor workstations offer similar sit-stand capabilities with user-powered height adjustment at a reduced cost.
The buttons for height adjustment are located on a storage tray at the rear of the work surface platform. The tray is excellent for keeping safe small items as the device is adjusted.
The Winston-E features 75 x 75mm and 100 x 100mm VESA tilter heads. The tilter heads are capable of swivel, tilt and rotation. They can also be moved horizontally to facilitate many monitors sizes.
Cable clips are located along the sides of the sit-stand workstation to keep cables out of the way and organized.
The Winston-E is available with two platform options: the compact for smaller work areas, and the standard for larger workspace needs.
|Shipping Weight||89 pounds|
|Shipping Dimensions||39" x 29" x 11"|
|Warranty||5 year limited|
MOTORIZED HEIGHT ADJUSTMENT
A simple button press will move the Winston-E workstation over a 18.4-inch vertical height range.
MONITOR HEIGHT RELATIVE TO WORK SURFACE
The monitors can be manually adjusted to change the distance from the work surface without moving the entire device. Each monitor can be independently adjusted to accommodate differently sized monitors.
FOCAL POINT ADJUSTMENT
The horizontal bar of the monitor attachments can be tilted backwards while the monitor tilter head attachments can be rotated so the monitors remain horizontally positioned, allowing for focal point adjustment.
Each VESA compatible monitor tilter head swivels from left to right.
The ideal viewing angle can always be achieved with easy up and down monitor tilt.
Each monitor can individually rotate from portrait to landscape.
At its highest point, the monitor sits 37.6 inches above the desk surface. This includes 18.4 inches of monitor and work surface adjustment plus 12.6 inches of monitor height adjustment above the work surface platform. The rear of the monitor stand measures 29.8 inches in height. These vertical measurements are identical for both the Compact and Standard versions.
The Winston-E2 work surface is available in one of two sizes. The first is the 22 inch deep x 30 inch wide standard platform. It measures 20.4 inches from the front to the central column, which aligns with the mounting points of two adjacent monitors in a maximally retracted, flat configuration. When the monitor attachment beam is rotated 20 degrees to its most forward position, the distance from the front of the platform to the monitor mounting point is 14.5 inches. The bar can also be angled towards the back by 45 degrees. The entire unit measures 30 inches from front to back.
The compact second platform option measures 16 inches deep x 30 inches wide. This allows for 14.4 inches of depth from the front of the platform when the monitors are in a flat configuration, and 8.5 inches when the monitor bar has been angled 20 degrees forward. The monitor bar can also be tilted backwards by up to 45 degrees. The entire device measures 24 inches from back to front.
The horizontal beam assembly holding the tilter heads has a total span of 35 inches. Please note that with two 30 inch wide monitors, the Winston-E 2 will not allow the monitors to angle inwards.
The width and thickness of the monitors can create limitations when angling them inwards. The illustration depicts two 28 inch wide, one inch thick monitors both angled inwards to their maximum of 20 degrees each.
The Winston-E2 workstation is kept stable by an ample 16 by 21 inch freestanding base.