CUSTOM LIGHT GRAY DUAL MONITOR ARM DISCOUNTED BY UP TO 60%
The heavy duty SAA2415 adjustable monitor arms in silver, black and white continue to be used for many Industrial and Medical Applications. Light gray color has been retired and the remaining inventory is being made available at a substantial discount. With a total weight capacity of 20 to 34 lb, the SAA2415 is well-suited for dual monitor applications.
The SAA2415-DUAL combines this heavy duty arm with one of our two dual monitor brackets supporting a range of monitor sizes, weights and VESA patterns. At discount levels in excess of 60%, this dual monitor configuration represents extraordinary value on an exceptionally well built monitor arm.
The medium bracket accommodates two monitors up to 23” in width and weighs 5 lb. In this configuration, the SAA2415-DUAL can handle two monitors weighing between 7.5 and 14.5 lb.
The large bracket accommodates two monitors up to 30” in width and weighs 6 lb. In this configuration, the arm can handle two monitors weighing between 7 and 14 lb.
Both brackets can be equipped with 75 x 75 and 100 x 100 mm VESA adapter plates. The large bracket has an additional option for a 100 x 200 mm VESA bracket.
More details about the arm can be found on the product page for the SAA2415 monitor arm. Note that the options available for the light gray version are limited to those advertised on this page.
Max Vertical Range
20 - 34 lb total (2 monitors + dual bracket) 7 to 14.5 lb per monitor
Standard Tilter Head (0 - 35 pounds)
Desk (MKIT-C), Wall (MKIT-D)
Two boxes: 16 and 12 lb
Two boxes: 24" x 14" x 4" and 23" x 14" x 4"
5 Year limited
INSTALLING AND ADJUSTING YOUR SAA ARM:
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
Side view of the SAA2415 when wall-mounted using MKIT-C. With no obstructions, the arm offers 15.5" of vertical travel and has a horizontal reach of up to 24". At its highest position, the arm extends 21.25" from the wall and 20.25" from its lowest vertical position. The arm travels 8" upwards from its most horizontal and 7.5" downwards. There is a 1" space from the wall to the rear of the arm.
iMAC SAA2415 - WALL MOUNTED DISTANCE FROM WALL
Side view of the SAA2415 when wall-mounted using MKIT-C. In this illustration, the arm is folded so that the monitor is perpendicular to the wall. The distance from the center point of the monitor to the wall depends on the vertical position of the arm. This determines the maximum size of the monitor or tablet that can be viewed at a 90 degree angle from the wall in this folded position. At the highest position, there is a 4" distance from the rear edge of the arm to the midpoint of the mounting place. This distance measures 7" at its mose horizontal position and 6.5" at its lowest position.
iMAC SAA2415 - DESK MOUNTED HORIZONTAL REACH
Top view of SAA2415 when desk mounted. When fully extended, the arm reaches out as far as 24". The arm width is 1.5". When retracted in the horizontal position, the arm can be folded into as little as 3.5". The arm extends out 15.25" to the left or right when folded.
iMAC SAA2415 - DESK MOUNTED MINIMUM HEIGHT
Side-view of the SAA2415 when desk-mounted. The surface of the desk will inhibit the arm from traveling to its lowest possible position. As a result, the total instant vertical adjustability will be limited to 12.75" compared to 15.5" with the wall mount option. To reclaim the range of motion, optional vertical extensions can be added.
iMAC SAA2415 - DESK MOUNTED MAXIMUM HEIGHT
Side-view of the SAA2415 when desk-mounted. The figure shows the impact of adding vertical extensions on the maximum height the arm can reach. The 12" extension allows the maximum height to reach 32". Please note that vertical extensions are not readily available in a matching Light Gray color. Call (888) 420-3200 for more information.
iMAC SAA2045 - VERTICAL EXTENSION TABLE MOUNT KIT C
Vertical Extensions have an impact on vertical adjustability in a desk mounted set up. Here are the ranges with MKIT-C. Note that the Vertical Extensions are not available in Light Gray.
ADJ1523 - FRONT VIEW
Front view of the EGT ADJ 1523 showing the dual 24" wide dual bracket. The central portion of the bracket has the 1.9" tilter head and 75 mm by 75 mm VESA hole patterns. The two centrally located holes are vertically spaced 2" apart and are intended for mounting the bracket to a combo monitor/keyboard arm. The horizontal slots are 5.5" long accommodating monitors up to 23" wide.
ADJ1523 - TOP VIEW
The bracket slopes forward starting three inches from the center at 3° on each side putting each end on a plane .66" in front of the center mounting area, as illustrated in the drawing.
ADJ1430 - FRONT VIEW
Front view of the EGT ADJ 1430 showing the dual 31" wide dual bracket. The central portion of the bracket has the 1.9" Ergomart specific tilter head and 75 mm by 75 mm VESA hole patterns. The two centrally located holes are vertically spaced 2" apart and are intended for mounting the bracket to a combo monitor/keyboard arm. The horizontal slots are 8" long accommodating monitors up to 30" wide.
ADJ1430 - TOP VIEW
The bracket slopes forward starting three inches from the center at 3° on each side putting each end on a plane .87" in front of the center mounting area, as illustrated in the drawing.
75 x 75 mm SLIDING VESA PLATE
100 x 100 mm SLIDING VESA PLATE
100 X 200 MM SLIDING VESA PLATE (FOR ADJ1430)
Sliding VESA brackets can be positioned anywhere along each slot.
Are the Light Gray arms compatible with components on other pages of your site?
Yes and No. The SAA2415-DUAL is part of our SERIES-118 modular mounting system. You can retrofit and modularize it with virtually all MKIT mounts as well as other devices designed for SAA arm products. However the Light Gray color is now a special order color and would require consultation with an Ergomart representative to determine the availability and cost to color match.