The US-made aluminum anodized Roller Track Horizontal Wall Track is the foundation of the Roller Track system. It can be mounted on walls, vertical struts, worksurfaces or poles. It can also be fixed under cabinets or secured to most ceilings. It accepts both fixed repositionable and easily movable sliding mounts. Both carriage styles support a wide range of equipment. Each rail includes end stops. The rail is not pre-drilled for fasteners which allows it to be drilled to accommodate site-specific conditions. It is available in three standard lengths: 39", 78", and 156", and comes in anodized metallic gray as a standard color with anodized black available when ordered and purchased in larger quantities.
The rail can be and frequently is resized after purchase to shorter lengths at the installation site to accommodate specific requirements. But since the ends are drilled and tapped, an end that is shortened on-site will require re-tapping so the end stops can be properly affixed. Fasteners that secure the rail to a mounting surface are always used through a series of clearance holes along the outside flanges. Please contact Ergomart with any questions or inquiries regarding custom lengths and colors.
|Shipping Weight||14.5 pounds||24.2 pounds|
|Shipping Dimensions||41" x 7" x 7"||80" x 7" x 7"|
|Warranty||5 Year Limited||5 Year Limited|
The US made aluminum anodized RT Rail is the foundation of the Roller Track system. It can be mounted on the wall, vertical struts, or poles and accepts movable or stationary mounts that support the desired equipment. Each rail includes 2 end caps and 2 stops. The rail is not pre-drilled for fasteners and is designed to be drilled to accommodate on-site installation.
The Roller Track is available in three standard lengths of 39", 78", and 156" and comes in anodized metallic gray as a standard color with anodized black available as an option. It can be cut down after purchase to shorter lengths during installation.
Since the ends of the Roller Track are drilled and tapped, an end that is shortened on-site will require re-tapping or modification to ensure the end stop functions properly.
Used to attach the Roller Track to an Ergomart Series 192 Pole, found in Ergomart Floor Stands and Monitor Carts. Can also faciliate mounting on a work surface. Call for details.