Roller Track Clamp Blocks are small clamping components that press against the top and bottom flange edges of the Roller Track Rail and are securely fastened to the vertical mounting surface. Roller Track Clamp Blocks are typically used as a means of attachment on certain exposed vertical standards (also known as Unistrut or "vertical strut channels") and tracks on technical and manufacturing desks and tables. They may be attached so that they accept the rail from the bottom during installation. Top clamp blocks are then clamped along the top RT flange to secure the rail to the structure. They can also be used to enhance security by providing an additional point of attachment to prevent the track from pulling away from the structure to which it is attached. Normally, if you fasten through the flanges, the clamps will not be necessary.
|Shipping Weight||0.3 pounds|
|Shipping Dimensions||9" x 6" x 5"|
|Warranty||5 Year Limited|
Roller Track Clamp Blocks are small clamping components that press against the top and bottom flange edges of the RT Rail and are fastened to the vertical surface.
Clamp blocks are specifically used to attach the R-Track to vertical standards (also known as Unistrut or "vertical strut channels") commonly seen in manufacturing, assembly and packaging to provide additional bracing so the rail/track does not pull away along the top edge under heavier loads.
The Clamp Blocks easily attach around the Roller Track and do not add any additional depth from the wall.