The MKIT-M2 is an integral member of the Roller Track Mounting System and enables users to set and position a near infinite variety of devices along a wall or other sturdy vertical surface and on the vertical members of production or technical workstations. In many cases the weight capacity of mount and track can exceed 100 pounds. Simply work with the Ergomart staff to insure your payloads and mounting circumstances are viable and in accord with our engineering guidelines.
All SERIES-118 components are designed to interface with the MKIT-M2. The breadth of the SERIES-118 offering provides architects, engineers and designers the one obvious path to solving complex mounting challenges. Components interfacing with the MKIT-M2s can be locked into exact lateral placements with the turn of the ratcheting brake knob. Loosen the knob and lift slightly upward against the component and device and lateral repositioning becomes surprisingly easy.
Two friction resistance set-screws within the mounting column press against durable acetal bushings that in turn lock poles and arms into a fixed position to prevent left/right swivel. Alternately, these same high performance bushings promote precise dampening of movement when set screws are incrementally loosened and adjusted to attain that "just-right-feel".
|Shipping Weight||3.3 pounds|
|Shipping Dimensions||9" x 6" x 5"|
|Warranty||5 Year limited|
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.