Talk to an ergo expert: (888) 420-3200 or Email Us

SKU

TRIPLE-192

Your Customization
TRIPLE-192 THREE MONITOR FLOOR STAND New
TRIPLE-192 THREE MONITOR FLOOR STAND

In stock

From $649.09

Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE

TRIPLE-192 THREE MONITOR FLOOR STAND

New USA ASSEMBLED
Please wait while your content is loading.

REQUIRED ITEMS

FLOOR MOUNTED POLE STAND FOR THREE MONITORS OFFERS SUPERIOR ADJUSTABILITY

HIGHLIGHTS:

  • Easily mount 3 monitors weighing up to 30 lb each anywhere along three hinged beams
  • The stand accommodates three monitors up to 27" wide, with the beams in flat alignment
  • Exterior beams can rotate inwards for a curved setup (max monitor size slightly reduced: 24" at a 20 angle)
  • Each monitor can independently rotate, tilt and swivel on their individual VESA mounts
  • Ideal for placing multi-monitor systems where floorspace is limited
  • Securely bolted to the floor on a heavy duty flange - contact us for other options
  • Customize as desired using Ergomart's compatible SERIES-192 components

DESCRIPTION:

The TRIPLE-192 is a heavy-duty three-monitor floor stand with a small footprint designed to be bolted to the floor. It is ideal for applications where floor space is limited and work surfaces or walls are not available for installation.

The triple articulating beam of the TRIPLE-192 provides a great degree of positioning flexibility to the three monitors. The screens are free to slide along their respective beams. The middle beam is 30” wide and the outer beams are 10” wide each. Each beam can angle inwards to accommodate a “curved” setup. The beams accept VESA compatible tilter head mechanisms that allow each monitor to independently tilt, swivel and rotate. These tilter heads accommodate either a 75x75mm or 100x100mm VESA hole pattern out of the box as well larger adapters available under the accessories tab. They can support monitors weighing up to 30 lbs each, for a total of up to 90 lbs of display equipment. For detailed information on the VESA standard of mounting, visit the VESA page of our Monitor Mounting Reference Guide.

The optional floor stand base cover fits snugly over the flange of the monitor floor stand to create a clean finished while providing additional wire concealment and protection. Pole sizes offered vary from 4' to 8', in 1' increments. Other pole sizes and options can be available upon request - call us to configure a custom solution that fits your specific needs or applications.

MODULAR AND MOBILE OPTIONS:

The TRIPLE-192 is part of a family of interoperable mounting devices built around our SERIES-192 pole. It is easy to add a keyboard tray or other accessories to the mounting pole. Our systems readily adapt to any application and can be modified as your needs change by adding or replacing only what you need. Visit our SERIES-192 product family page to view our full complement of SERIES-192 compatible solutions.

If you are in need of a more flexible or mobile option, please consider our MCART-03 and other heavy duty mobile cart products, which combine comparable mounting capabilities with the added maneuverability of a wheeled base with locking casters.

Shipping Weight Floor Flange Mount: 10 lb
Pole: 14 to 30 lb, depending on length
Monitor Mount: 19 lb
Shipping Dimensions Floor Flange Mount: 13" x 13" x 6"
Pole: size varies, ships in second box
Monitor Mount: 32" x 15" x 8"
Warranty 5 year limited

Mount Type

Floor Stand Pole Mount

Number of Monitors

3

Mounting

Bolted to Floor

Weight Range

Up to 30 lb per monitor

Monitor Horizontal Reach

Compact

Vertical Adjustment

Readjustable along 4', 5', 6', 7', 8' or custom pole

VESA Options

75 x 75
100 x 100

Portrait to Landscape

Yes

Max Swivel (at Elbow)

Left/right beams fully swivel forward and back

Max Swivel (at Monitor)

Depends on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down

Monitor Mount
Poles and Base
Base Cover
Monitor Mount

MAXIMUM MONITOR WIDTH - FLAT CONFIGURATION - FRONT VIEW

TRIPLE-192 specification showing the pole and base dimensions from a front view, including monitors in a flat configuration.

The above drawing shows the triple monitor beam with the monitors positioned in a flat configuration. In this setup, each monitor’s maximum width can measure up to 27 inches. The middle monitor can be mounted anywhere on a 30-inch beam, while the outer monitors are placed along 10-inch beams.

 

MAXIMUM MONITOR WIDTH - ANGLED CONFIGURATION - TOP VIEW

TRIPLE-192 specification showing the monitor mounting dimensions from a top view, including monitors in a curved configuration.

The outer beams can be angled in for a curved viewing experience. In this case, the maximum allowable width for the monitors is slightly diminished from when they are flat. At a 20 degree angle, the maximum width can be around 24 inches, assuming the monitors are two inches deep.

 

Poles and Base

SERIES-192 FLANGE POLE STAND LENGHTS

TRIPLE-192 pole floor stand specification drawings showing five available pole lengths

The above drawings show the various standard pole lengths available with SERIES-192 compatible components. All poles come standard with access ports at top and bottom. The mounting pole outer diameter is 1.92 inches

 

TRIPLE-192 POLE STAND BASE - TOP AND SIDE VIEWS

TRIPLE-192 specification showing the flange base and mounting pole dimensions from top  and side views.

The circular flange base of the TRIPLE-192 has a 12" diameter and is secured to the floor using six bolts located around a 9.75" diameter. The flange that accepts the heavy duty SERIES-192 pole is 5" tall.

 

Base Cover

FLOOR STAND BASE COVER - ISOMETRIC VIEW

Isometric line drawing of SERIES-192 floor stand base cover.

The above drawing depicts an isometric view of the base cover designed to cover the entirety of the flange that accepts the 1.92" diameter pole on all SERIES-192 floor stands.

 

FLOOR STAND BASE COVER - SIDE VIEW

Side view line drawing of SERIES-192 floor stand base cover showing all key measurements.

This side view of the base cover shows all of its critical dimensions. The total height is 5.53", the diameter is 12.63". The rectangular wire access hole is 1" x 1.45". The wall thickness is 0.25" and the hole at the top that accepts the pole is 1.96" in diameter.

 

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

QTY:
$2.00
VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

QTY:
$3.00
200x200mm Flat VESA Plate with Hardware
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

QTY:
$21.00
100x200mm Flat VESA Plate with Hardware
100x200mm Flat VESA Plate with Hardware

V12

The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.

QTY:
$15.75
Leave a Review
You're reviewing:TRIPLE-192 THREE MONITOR FLOOR STAND
Start Rating
  • What does the 5 Year Limited Warranty actually cover?

    The warranty is five years from the ship date of the product and covers the arm and data entry system against premature wear and defects. The gas spring cylinder is covered to maintain 95% of its stated maximum load at the time of purchase. Performance in 24/7 environments is warranted at 3 years. Customers pay for shipping of their product back to the factory for repairs. ALL returned products must have a return authorization, which is provided by Ergomart via fax or email.

  • Can I mount an Apple iMac or Cinema Display on this monitor mount?

    No, but, we do have other products that handle iMacs and Cinema Displays. You might consider a Heavy Duty TRS2415 Arm and Data Entry Combo to accommodate monitors and iMacs weighing approximately 30 pounds.

  • Can this be used as a freestanding base?

    This is not meant to act as a freestanding base. It must be bolted to the floor or surface.

  • Are screws/hardware included for bolting the flange to the floor? If not, what size is needed?

    The holes on the flange are through holes for fasteners up to 3/8" in diameter. However, we don't know the specifics of each installation, and for that reason customers are responsible for determining the appropriate fastener to use for their given installations. If you have any questions regarding the appropriate fastener for your application work with an installation professional, consult a civil or mechanical engineer or call Ergomart product experts with your questions.

  • I have several areas with different floor construction. How do I know this will attach without breaking inside the floor?

    The flange can be mounted to wood and concrete. For more guidance on the appropriateness of this product for your specific application(s) please contact customer service with the details of your project.

Please wait while your content is loading.