Talk to an ergo expert: (888) 420-3200 or Email Us
The health and productivity benefits of alternating between sitting and standing are well-documented. Our Sit-to-Stand Desktop Workstation is a quick-adjust variable height system with an oversize work platform and premium monitor mount components. It provides 17 inches of instant vertical adjustability.
The Dorian's generous work surface is designed as a compact comfortable desk, accommodating not only your keyboard and mouse but all your other essential items to move with you as you change the height of the workstation. The adjustment is easy: just press a button located on the right bottom edge of the work surface and move the workstation up or down. The motion assist mechanism inside the Dorian's column makes for smooth, nearly effortless vertical travel. Once the button is released, the workstation locks in place and offers a sturdy platform that will not droop with time. It is also specifically designed to minimize bounce caused by heavy keyboarding. A mini tray located right under the monitor can hold your pens, smartphone, keys, and other small items.
The relative height of the monitor above the work platform is variable and is determined during assembly, but may be reset, if needed, in less than two minutes. When setup is complete, the entire workstation moves up and down collectively. The monitor can tilt up and down, swivel left and right, and rotate from landscape to portrait and back with ease.
The Dorian typically rests on top of a desk, on a broad, heavy base which ensures overall stability. The pads underneath the base allow the workstation to safely move and swivel on the desk, allowing the user to achieve the desired positioning. Clamp and through-desk mounting options are also available.
The total weight capacity of the Dorian Single is between 7-20 lbs. This is the sum of the weights of the monitor to be mounted and all the items expected to be placed on the work surface, which will vary depending on the usage. We recommend estimating 1-2 lb for a typical keyboard and mouse.
Questions? Please call us at 888 420 3200.
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
To adjust the Dorian's worksurface up and down, simply press the button located on the bottom right side of the work surface and move the workstation to the desired height.
This convenient mini tray is positioned at the back of the work surface where it attaches to the Dorian's column. It is the perfect spot for placing small items such as a pen, a mobile device, or keys.
The horizontal beam can be positioned anywhere along the Dorian's column with a simple one-time adjustment that optimizes the relative height of the monitor and keyboard for each user.
The monitor is mounted on a VESA compatible tilter mechanism that can be positioned anywhere along the horizontal beam. The lateral positioning, horizontal swing, vertical tilt, and portrait landscape orientation of the monitor can be adjusted using this mechanism.
The cable management clips situated along both sides of the Dorian's column act as inconspicuous guides for wires and cables, keeping them organized and out of the way. The clips open to allow cables to be inserted and securely snap into place to contain them.
|Shipping Weight||Box 1: 32 pounds | Box 2: 56 pounds|
|Shipping Dimensions||Box 1: 28 x 26 x 3 inches | Box 2: 35 x 33 x 7 inches|
|Warranty||5 Year limited|
The monitor can swivel left and right, allowing for the monitor to be oriented towards the user as desired.
The vertical adjustability range is 17.1", ensuring a true sit-stand experience for users up to 6'3" tall.
The monitor can be adjusted up to 90° in the upward direction and 45° downward with respect to the vertical orientation, allowing the user to select to most comfortable viewing angle.
PORTRAIT & LANDSCAPE
The monitor's orientation can be changed from portrait to landscape with an instant adjustment.
The monitor mount can be placed anywhere along the horizontal beam.
The Dorian Single workstation has a single beam attached to the height adjustable column. The beam is 10" wide.
The Dorian's work surface is 30" wide. It offers a substantial amount of space for a keyboard, mouse, notepad and other essential items.
With the monitor beam mounted at its lowest practical position, 4.5", the monitors sit 6" to 23" above the desk surface.
When the beam is mounted to the highest position along the column, the center of the monitor VESA mount can adjust from 28" to 45" above the desk.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.