Talk to an ergo expert: (888) 420-3200 or Email Us
Take advantage of the health and productivity benefits a sit-to-stand workstation can provide. The Dorian dual monitor computing station supports two monitors on a height-variable base that includes an ample work platform. The device allows for just over 17 inches of easily-adjustable vertical travel.
The Dorian has a 30" x 24" working surface which can accommodate not only a keyboard and mouse, but other essential desk items. Adjustment of height is simple and quick: press a button on the right bottom edge of the worktop and guide the entire workstation up or down within its 17.1" range. A mechanism inside the Dorian's main column facilitates smooth movement. Once the desired height is reached, the button can be released and the device will remain sturdy and locked in the correct position. Even during heavy keyboarding, the workstation is designed to reduce bounce and remain stable. A small tray positioned beneath the monitors is perfect for keeping smaller desk items safe and handy.
Although the height of the monitors above the work surface is set during assembly, it can be adjusted in less than two minutes if required. Once the device is assembled, the entire computing station moves up and down as one unit. Each monitor can tilt, swivel and rotate from landscape to portrait independently.
The Dorian's large, heavy base ensures the device is stable. Pads located beneath the base allow the workstation to move and swivel on the desk so the user can optimally position the unit. The Dorian can also be attached to a desk via a clamp or through-desk mount.
The Dorian Dual has a total weight capacity of 10 to 26 pounds. This is the total weight of both monitors and all the items expected to be placed on the work surface, including the keyboard and mouse. Assuming a 1 lb total keyboard and mouse weight, the Dorian Dual can handle two monitors weighing 4.5 to 12.5 lb each.
Questions? Please call us at 888 420 3200.
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
A button located on the bottom right side of the work surface activates vertical movement. Simply press, move, and release at the desired location.
This small tray is positioned underneath the monitors on the rear of the work surface. It is the perfect location for storing and securing small items.
On assembly, monitor beam can be placed at any height along the column for ideal monitor to worksurface distance. This can be readjusted at a later time if required.
Each monitor is mounted on a VESA compatible tilter mechanism. These tilters can be positioned anywhere along the horizontal beam. This simple system provides plenty of flexibility in terms of the lateral positioning, horizontal swing, vertical tilt, and portrait/landscape orientation of each monitor.
The cable management clips situated along both sides of the Dorian's column act as inconspicuous guides for wires and cables, keeping them organized and out of the way. The clips open to allow cables to be inserted and securely snap into place to contain them.
|Shipping Weight||Box 1: 32 pounds | Box 2: 56 pounds|
|Shipping Dimensions||Box 1: 28 x 26 x 3 inches | Box 2: 35 x 33 x 7 inches|
|Warranty||5 Year limited|
The monitors can swivel left to right, allowing the user to fine-tune positioning for each monitor for optimal viewing.
With a vertical height range of 17.1", the Dorian is suitable as a sit-to-stand workstation for users up to 6' 5" tall.
Each monitor can be adjusted upwards 90° and downwards 45° for perfect viewing angles whether sitting or standing.
PORTRAIT & LANDSCAPE
Each monitor's orientation can be adjusted between portrait and landscape quickly and easily.
The monitors can be attached anywhere along the horizontal beam, thus accommodating a wide range of monitor sizes.
The Dorian Dual workstation has a single beam attached to the height adjustable column. The beam is 30" wide.
Height adjustment with beam mounted 4.5” from Dorian’s work platform. With the beam at its lowest practical position, the adjustment is from 6 to 23".
When the horizontal beam is attached to the vertical column at its highest position, the beam can adjust from 28" to 45" above the desk surface.
The Dorian's 30" wide large work surface allows the user to bring all necessities with them when lifted to a standing position.
When the monitors of the Dorian Dual are rotated inward to create a curved or envelope viewing effect, the maximum allowable width is slightly diminished when compared to a flat arrangement. Assuming two-inch deep monitors, the maximum width is approximately 25 inches when rotated inward.
If a flat or collinear configuration viewing perspective is desired, the maximum width of each equally sized monitor can be approximately 26 inches.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.