Talk to an ergo expert: (888) 420-3200 or Email Us



PM63 Triple/Six Monitor Pole Mount

  • Triple monitor pole mount with unparallel adjustment
  • Mounts on 192-Series Floor Stands, other 1.5"-2" poles
  • Accepts 28.5"-wide monitors in flat configuration
  • Max monitor size is up to 27" in a flat configuration
  • Beam assembly has 30" center, 10" left/right sections
  • Monitors slide on beams, swivel, tilt rotate independently
  • Multiple PM series mounts can be combined on one pole
  • Pole and base not included
Increase Down Increase Up

Texas Tax-Exempt Customers:

Please select REQUEST QUOTE



  • Mount three monitors weighing up to 30 lb each across three sturdy articulating beams
  • Each beam row accommodates three monitors up to 27" wide in flat orientation
  • The attached monitors can be individually tilted, rotated and swiveled
  • Max monitor size is reduced to approximately 24" when outside monitors tilted inwards 20 degrees
  • Perfect for users lacking furniture or wall space for a multi-monitor system
  • Ideal for use with Ergomart's Series 192 floor pole stands

Create a presentation display, an informational station, or point of sale stand wherever is needed, without the need for wall space or mounting furniture. Perfect for virtually any environment, including education, lobbies, stores, medical and more. The PM63 makes use of the CONNECT monitor mount, supporting three adjustable monitor attachments on three articulating beams. An additional row of beams can be added to mount an impressive six monitors. The PM63 monitor mount system is designed to be used in conjunction with Ergomart's Series 192 floor stands, sturdy 2" poles available in multiple lengths.

The PM63 consists of three horizontal beams, a 30" center beam and two 10" beams on either side, each designed to hold one monitor. The beams are connected via hinges, which can be moved to place the monitors in a more curved configuration. The monitor tilter head attachments can be placed anywhere along their corresponding beam, allowing for multiple monitor sizes to remain flush. When used in a flat configuration with equally sized monitors, the largest compatible monitor size is 27" in width. If the outside beam arms are tilted in 20 degrees, the maximum monitor width is reduced to approximately 24" as the bezels will impede movement. Each monitor can be separately tilted, rotated and swiveled for fine adjustments.

To create a six-monitor mount system, another row of beams is added. This second beam can be attached anywhere on the mounting pole, allowing for monitors of any height to sit flushly with the other beam if desired.

Ergomart recommends using the PM63 monitor mount with a Series 192 pole floor stand. It is available in three options - the flange pole floor stand, which is bolted with six fasteners to the floor and two moveable options, the center pole floor stand and offset pole floor stand. However, providing the pole is adequately stable, the monitor mount can be attached any pole with an outside diameter of 1.5" - 2".

Shipping Weight 17 pounds
Shipping Dimensions 32" x 15" x 8"
Warranty 5 year limited

Mount Type

Monitor mount for 1.5-2" OD Pole

Number of Monitors



1.5"-2" pole

Weight Range

Up to 30 lb per monitor

Monitor Horizontal Reach


Vertical Adjustment

Readjustable on 4', 5', 6', 7', 8' or custom pole

VESA Options

75 x 75
100 x 100
100 x 200

Portrait to Landscape


Max Swivel (at Elbow)

Left/right beams fully swivel forward and back

Max Swivel (at Monitor)

Depends on monitor size/tilt

Monitor Tilt Range

+90° up, -45° down


PM63 triple monitor pole mount specification drawing showing maximum monitor width in flat configuration

If a flat configuration is desired for the PM63, each monitor’s maximum width can be approximately 27 inches wide.



PM63 triple monitor pole mount specification drawing showing maximum monitor width in curved configuration

The PM63 has outer beams that can be angled in for a curved viewing experience. In this case, the maximum allowable width for the monitors is slightly diminished from when they are flat. At a 20 degree angle, the maximum width can be around 24 inches, assuming the monitors are two inches deep.


100x200mm Flat VESA Plate with Hardware
100x200mm Flat VESA Plate with Hardware


The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.

200x200mm Flat VESA Plate with Hardware
200x200mm Flat VESA Plate with Hardware

This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.

200x400mm Flat VESA Plate with Hardware
200x400mm Flat VESA Plate with Hardware

The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.

VESA 1/4-inch Spacer Kit
VESA 1/4-inch Spacer Kit

This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.

VESA 1/2-inch Spacer Kit
VESA 1/2-inch Spacer Kit

This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.

Leave a Review
You're reviewing:PM63 Triple/Six Monitor Pole Mount
Start Rating
Please wait while your content is loading.