Talk to an ergo expert: (888) 420-3200 or Email Us
The PM62 utilises the adjustable CONNECT monitor mounts to create a versatile, multi-monitor pole mount for two or four monitors. This mount is designed for use with the sturdy and rugged Series 192 floor stands, particularly the flange floor stand, which is bolted directly into the floor. This system is ideal for users who need an adjustable multi-monitor setup, but lack the furniture or wall space. As a freestanding mount, this system can be utilized virtually anywhere, including retail and business environments, hospitals and other medical facilities, as a presentation or informational display, point of sale stand and many other applications.
On the PM62, two VESA compatible monitors are attached to a 30" beam. The monitor tilter head attachments can be moved anywhere along the beam, allowing for a variety of monitor sizes to remain flush with each other. The beam can handle two equally sized monitors up to 28.5" when they are positioned in a flat configuration. Each monitor attachment provides individual tilt, swivel and rotation. Please note, if the monitors are tilted inwards, the maximum monitor width decreases to approximately 27" as the bezels impede movement on larger monitors.
For the quad monitor mount system, a second beam is added, which can be placed anywhere along the pole. This allows for monitors of various heights to be properly accommodated and interchanged.
The PM62 works best when attached to a Series 192 pole floor stand. It is available in three options - the flange pole floor stand, which is bolted with six fasteners to the floor and two moveable options, the center pole floor stand and offset pole floor stand. Although the PM62 is designed to be used with Ergomart's Series 192 poles, the monitor mount can be attached any pole with adequate stability and an outside diameter of 1.5" - 2".
|Shipping Weight||13 pounds|
|Shipping Dimensions||32" x 15" x 4"|
|Warranty||5 year limited|
If a flat configuration is desired for the PM62, the maximum width of each equally sized monitor can be approximately 26 inches.
When the monitors of the PM62 are rotated inward, the maximum allowable width is slightly diminished from when they are flat or colinear. Assuming two-inch deep monitors, the maximum width is approximately 25 inches when curved or angled inward.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.