Talk to an ergo expert: (888) 420-3200 or Email Us
Ergomart's extreme heavy-duty LCD and TV Pole Mount gets the job done when attached to a pole with outside diameters between 1.5 and 2 inches. The PM80 is the perfect pole mount for busy medical facilities, laboratories, kiosks and retail environments—any place you need to mount a heavier or larger monitor (from 35 to 75 pounds!) with a minimal footprint. This is a heavy-duty product that will stand up to the toughest environments. Ideal for LED, LCD and Plasma televisions and monitors. With its unprecedented tilt range, the PM80 allows the user substantial tilting capability.
Optional VESA Sizes to Handle Larger or Heavier Monitors: The Adjustable MSU4X6 can fit any VESA hole pattern between 100mm (height) x 300mm (width) and 400mm (height) x 600mm (width). From its largest position, the vertical bars can be reversed and slid inward to fit smaller LCD or plasma screens. See our VESA reference page for information on the MSU4x6 and the compatible VESA Sizes.
|Shipping Weight||13 pounds|
|23 pounds (MSU4x6 VESA option)|
|Shipping Dimensions||17" x 14" x 6"|
|27" x 16" x 9" (MSU4x6 VESA option)|
|Warranty||3 year limited|
The tilter head mechanism can move up to 90° upward and 45° downward with respect to vertical orientation, allowing the user to select the most comfortable viewing angle. Upward tilt adjustment may be impeded by the pole depending on the size of the monitor.
The PM80 has a dual tilter head and mount to manage heavier and larger monitors.
The PM80 has a dual tilter head and mount to manage heavier or larger monitors.
The PM80 has a dual tilter head and mount to manage heavier or larger monitors. Image depicts several measurments including the 8" length of the arm and tilter mechanism combination.
Twin Tilter VESA option 100x200mm, side view with PM80 tilter head and mount.
Twin Tilter VESA option 100x200mm, front view with PM80 tilter head and mount.
Twin Tilter VESA option 200x200mm, side view with PM80 tilter head and mount.
Twin Tilter VESA option 200x200mm, front view with PM80 tilter head and mount.
Twin Tilter VESA option 200x400mm, side view with PM80 tilter head and mount.
Twin Tilter VESA option 200x400mm, front view with PM80 tilter head and mount.
Twin Tilter VESA option MSU4X6, side view with PM80 tilter head and mount.
The MSU 400x600 VESA plate is used to accommodate very large monitors, here it is shown in its widest (black) and narrowest (gray) configurations.
|PM80 SAMPLE MONITOR HEIGHTS AND ESTIMATED RESULTING TILT RANGES|
|The pole will naturally create an impediment to the tilt range based on the height of the monitor... The below table predicts the approximate tilt range of various LCD monitors and TV monitors with a VESA hole pattern vertically centered. When the pole does not obstruct the tilt of the monitor, tilt capability is greatly increased. If the monitor is attached to the bottom of a drop down pole, it can be set to tilt down as much as 44 degrees. Conversely, a monitor atop a pole can tilt as much a 90 degrees upward! This means the monitor could literally be parallel to the floor, facing the ceiling.|
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.