Talk to an ergo expert: (888) 420-3200 or Email Us
GRASP – MOVE – RELEASE. We have combined our new, hyper-functional CONNECT beam mount with our extra heavy-duty 2415 arm to provide 14.5” of effortless vertical travel and 21.5” of horizontal reach for a dual display solution. This arm fits the bill for anyone who requires precise control of two LCD monitors. This system allows the user to slide the tilter head mechanisms anywhere along the 30” horizontal beam to fit a variety of monitor sizes up to 28.5” in width. Each screen can be tilted, swiveled and rotated individually for precise positioning.
Black is the standard color on this arm. Metallic Gray may require longer lead times. Call for other color options.
For comprehensive information, detailed specifications, and larger images of the CONNECT family of monitor stands, and to view additional product configurations, please visit our CONNECT page.
Questions? Please call us at 888 420 3200.
Professional installation is always recommended for all wall-mounted Ergomart products. Improper installation may result in injury or damage. Consult Ergomart technical support regarding any mounting concerns or questions.
|Shipping Weight*||Box 1: 12 lbs | Box 2: 14 lbs|
|Shipping Dimensions||Box 1: 21" x 14" x 4" | Box 2: 40" x 14" x 6"|
|Warranty||5 Year limited|
This product ships in two boxes.
*Weights are approximate.
VERTICAL ARM RANGE
The CMD2415 features a large 14.5” vertical range when unobstructed by the desk surface or other objects.
The arm extends out up to 21.5” and folds into 8” to create space when not in use.
The arm can be rotated 360° at its base providing there are no obstructions to its movement.
The beam holding the two monitors rotates 360° at the point where it is attached to the arm, providing the arm is not below its horizontal position.
The monitor mounts can be placed anywhere along the horizontal beam which allows for a variety of monitors sizes up to a maximum of 28.5” in width in the landscape position.
The monitors independently swivel left and right until they are obstructed by the beam so positioning is easy for optimal viewing.
Each monitor can be individually adjusted upwards 90° and downwards 45° for the most comfortable viewing angle.
Each screen can rotate a full 360° on the tilter head allowing for easily switching between landscape and portrait views.
Side view of the CMD2415 when wall-mounted. If the arm is free from obstructions, the total vertical range from highest to lowest point is approximately 14.5”.
When desk-mounted, the full vertical movement of the arm can be restricted when the base of the arm hits a work surface. This can be rectified by adding an optional vertical extension. Without the extension, vertical travel is limited to 13.5”.
Side-view of the CMD2415 when desk-mounted. The figure shows the impact of adding vertical extensions on the maximum height the arm can reach. The 12" extension (with Mount Kit C) allows the center of the VESA pattern at the back of the monitor to reach a maximum height of 31.5".
Table shows the vertical range of motion when when using various sizes of the available vertical extensions. Please refer to the drawings above for a visual representation of Minimum and Maximum Height on Desk.
The CMD2415 arm viewed from above. Stretched to its maximum horizontal length, the arm measures approximately 21.5” from the mounting point to the back of the monitors. When completely retracted, the arm is only 8”.
The dual monitor setup places the two tilter mechanisms side by side anywhere along a 30” horizontal beam. In this configuration, the CMD2415 can accommodate monitors that measure up to 28.5" in width each in landscape orientation.
Two monitor setups are extremely popular with home and office workstations. If a flat viewing configuration is desired for the CMD2415, the maximum width of each display can be approximately 28.5 inches.
With the CMD2415 the monitors can be angled in. In this configuration the maximum allowable width for the monitors is approximately 27 inches, assuming 2-inch deep monitors.
The 100 x 200 mm VESA adaptor is compatible with certain larger monitors. It is used to attach the monitor to an Ergomart tilter head, present in all SAA, SA, and LS arms and mounts. If your monitor has a recessed VESA attachment point, you may also need an Ergomart VESA spacer kit, available below in the accessories tab.
This large VESA bracket is intended for mounting a monitor or TV with a 200x200 mm, 100x200 mm, or 120x180 mm hole pattern. The central hole patterns are 50x50 mm, 75x75 mm, and 100x100 mm, enabling this bracket to attach to the mounting location (e.g. an Ergomart Tilter Head) using a VESA 75/100 adaptor.
The large 200x400 mm VESA adaptor plate supports 50 mm, 75 mm, 100 mm and 200 mm square patterns, as well as 100x200 mm, 120x180 mm, 200x300 mm and 200x400 mm rectangular patterns. In some cases an additional 75 or 100 mm VESA adaptor is needed to interface the 200 x 400 mm VESA plate to the mounting location.
The extra large MSU4X6 VESA adaptor bracket attaches to a wide range of VESA patterns from 100x300 mm up to 400x600 mm. The hole patterns on the central plate allow it to be mounted to tilter heads or wall mounts, often using an additional smaller VESA plate (e.g., 75 mm, 90 mm, 100 mm, 200 mm or 100x200 mm) in between.
This VESA 1/4-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/4" or less to be attached to an Ergomart VESA plate.
This VESA 1/2-Inch Spacer Kit allows monitors with VESA hole locations that are recessed by 1/2" or less to be attached to an Ergomart VESA plate.